nVent HOFFMAN ED1PBX PB1 Drawn Pushbutton Enclosure, 3-1/2 in L x 4 in W x 3-3/4 in D, 1 Outlets, NEMA 4/IP66 NEMA Rating, Steel
Pushbutton Enclosures
91016
MFG #: ED1PBX
nVent HOFFMAN
135.49000
/ ea
nVent HOFFMAN Pushbutton Enclosure, Drawn, Series: PB1, 3-1/2 in Length, 4 in Width, 3-3/4 in Depth, NEMA 4/IP66, Domed Cover, 1 Outlets, Wall Mount, Steel, ANSI 61 Polyester Powder Painted, Gray
- http://www.hoffmanonline.com(Seller Home Page URL)
- Install Instructions 1 URL - 11015_WPM5TNV3DFSRC4G0.pdf(Install Instructions 1 URL)
- Install Instructions URL - stream_document.aspx?rRID=19376&pRID=8343(Install Instructions URL)
- Spec Sheet 1 URL - Hoffman_ED1PB1_Specification_Sheet.pdf(Spec Sheet 1 URL)
- Spec Sheet URL - Spec-00009.pdf(Spec Sheet URL)
- Tech Drawing URL - IDW_DOCUMENT_1518579881673.x-zip-compressed(Tech Drawing URL)
- Warranty URL - terms-of-sale(Warranty URL)
- Applications
- Features
| Controls and Drives |
| Drawn 16 gauge steel; no welded seams or sharp corners, Cover screws outside gasket sealing surface, Flat or domed flanged cover, Bonding provision on cover, Grounding stud on body, Oil-resistant gasket , External welded-on mounting brackets for easy installation, Factory stAed 4-way pushbutton holes, 30.5-mm or 22.5-mm size holes |
| Drawn 16 ga steel, no welded seams or sharp corners |
| Cover screws outside gasket sealing surface |
| Grounding nut in body of enclosure |
| Bonding provision on cover |
| Oil-resistant gasket |
| External wall mounting brackets for easy installation |
| Factory stamped 4-way pushbutton holes |
| These enclosures have no welded seams or sharp corners |
| 16 ga steel construction |
| ANSI 61 gray polyester powder paint inside and out |
| These enclosures have no welded seams or sharp corners |