nVent HOFFMAN E4PBXM PB1 Extra Deep Pushbutton Enclosure, 10 in L x 4 in W x 4-3/4 in D, 4 Outlets, NEMA 12/IP65 NEMA Rating, Steel
Hoffman Push-Button Enclosures
60209
MFG #: E4PBXM
nVent HOFFMAN
209.39000
/ ea
- Compliance Cert URL - Hoffman_E4SPBG_Compliance_Certificate_1.pdf(Compliance Cert URL)
- http://www.hoffmanonline.com(Seller Home Page URL)
- Install Instructions 1 URL - 11015_9KDB1L2EVXUOW584.pdf(Install Instructions 1 URL)
- Spec Sheet 1 URL - Hoffman_E10PBX_Specification_Sheet.pdf(Spec Sheet 1 URL)
- Spec Sheet URL - Spec-00008.pdf(Spec Sheet URL)
- Tech Drawing URL - IDW_DOCUMENT_1518579360543.x-zip-compressed(Tech Drawing URL)
- Warranty URL - terms-of-sale(Warranty URL)
- Applications
- Features
| Controls and Drives |
| 16 or 14 gauge steel, Seams continuously welded and ground smooth, Captivated cover screws thread into sealed wells, Bonding provision on cover, Grounding stud on body, Oil-resistant gasket, Factory stAed 4-way pushbutton holes, Enclosures 6.00 x 4.00 x 4.75 in. (152 x 102 x 121 mm) and larger have internal detachable hinge to hold cover open during wiring, External welded-on mounting brackets for easy installation, 30.5-mm or 22.5-mm size holes |
| Seams continuously welded and ground smooth |
| Captivated cover screws thread into sealed wells |
| Grounding nut in body of enclosure |
| Bonding provision on cover |
| Oil-resistant gasket |
| Factory stamped 4-way pushbutton holes |
| Enclosures 6 x 4 x 4-3/4 in (152 x 102 x 121 mm) and larger have internal detachable hinge to hold cover open during wiring, yet permit immediate removal |
| External wall mounting brackets for easy installation |
| 16 or 14 ga steel |
| Designed to hold 30.5 mm and 22.5 mm pushbuttons and switches, with added depth to accommodate additional pushbutton contact blocks |
| 22.5 mm hole |
| 16 or 14 ga steel |
| ANSI 61 gray polyester powder paint inside and out |