nVent HOFFMAN A44PBCOL P1 Angled Pedestal Column, Steel, Gray
Enclosure Mounting Accessories
25530
MFG #: A44PBCOL
nVent HOFFMAN
587.06000
/ ea
- http://www.hoffmanonline.com(Seller Home Page URL)
- Install Instructions 1 URL - 11015_60DIZRUQO7PCWGNF.pdf(Install Instructions 1 URL)
- Install Instructions 1 URL - stream_document.aspx?rRID=19770&pRID=5000(Install Instructions 1 URL)
- Install Instructions URL - stream_document.aspx?rRID=19770&pRID=5000(Install Instructions URL)
- Spec Sheet URL - Spec-00485.pdf(Spec Sheet URL)
- Tech Drawing URL - C2604-C.gif(Tech Drawing URL)
- Warranty URL - terms-of-sale(Warranty URL)
- Applications
- Features
| Controls and Drives |
| Pedestals enable many types of enclosures and boxes to be floor mounted |
| Four columns and two bases are available |
| Columns can be mounted on either base, through the vertical column or directly to the enclosure |
| A cutout must be made in the enclosure if the wires are to come through the column |
| Columns have flanges at each end and a gasketed access plate |
| Screws, oil-resistant gaskets and box connector fitting are furnished with each column for joining an enclosure to the top of the column |
| Columns are 14 ga steel with 10 ga flanges, 18 x 18 in (457 x 457 mm) base is 0.19 in (5 mm) steel and 24 x 24 in (610 x 610 mm) base is 1/4 in (6 mm) steel |
| Both bases have leveling screws and holes for bolting to the floor |
| Finish on bases and columns is ANSI 61 gray polyester powder coating over pretreated surfaces |
| The user would normally remove the mounting brackets from the enclosure, if the enclosure is mounted on a pedestal |