| U chipbreaker - good chip control at low feed rate and varied radial depth of cut with low cutting force |
| Suitable for automatic lathes |
| Low feed |
| Sharp edge |
| PR1225 grade superior wear and oxidation resistant MEGACOAT on micrograin carbide substrate |
| Light interrupted to interrupted cutting of stainless steel |
| 4 cutting edges |
| 0.08 to 0.202 mm corner point tolerance |
| +/-0.13 mm thickness tolerance |
| 0.05 to 0.152 mm inscribed circle tolerance |
| 0.12 to 0.32 mm feed/rev |
| 9.52 mm cutting edge length |
| 11 deg rake |
