Schneider Electric LC1D25M7 TeSys™ D-Line Standard IEC Contactor, 220 VAC Coil, 25 A Max Load, 3NO, 3 Poles

Contactors
97076 MFG #: LC1D25M7
Schneider Electric
212.10000 / ea
11003_0KQL1PTXA4ERCZ62
QTY
Add to Wishlist
  • Applications
  • Features
Motor control;resistive load
Without built-in suppressor module
Without built-in bidirectional peak limiting diode suppressor coil technology
IP2 x IEC 60529/VDE 0106
40 A at <=140 deg F power circuit/10 A at <=140 deg F signaling circuit conventional free air thermal current
450 A at 440 VAC power circuit conforming to IEC 60947/140 A AC signaling circuit conforming to IEC 60947-5-1/250 A DC signaling circuit conforming to IEC 60947-5-1 IRMS rated making capacity
450 A at 440 VAC power circuit conforming to IEC 60947 rated breaking capacity
120 A <=104 deg F 1 min power circuit/240 A <=104 deg F 10 sec power circuit/380 A <=104 deg F 1 sec power circuit/50 A <=104 deg F (40 deg C) 10 min power circuit/100 A 1 s signaling circuit/120 A 500 ms signaling circuit/140 A 100 ms signaling circuit rated short time withstand current
40 A gG at <=690 VAC coordination type 2 power circuit/63 A gG at <=690 VAC coordination type 1 power circuit/10 A gG signaling circuit conforming to IEC 60947-5-1 associated fuse rating
2 mOhm at 50 Hz - Ith 25 A power circuit average impedance
600 VAC power circuit certifications CSA/600 VAC power circuit certifications UL/690 VAC power circuit conforming to IEC 60947-4-1/690 VAC signaling circuit conforming to IEC 60947-1/600 VAC signaling circuit certifications CSA/600 VAC signaling circuit certifications UL rated insulation voltage
12 to 22 ms closing/4 to 19 ms opening operating time
B10d is equal to 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1/B10d is equal to 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1 safety reliability level
3600 cycles/hr at <=140 deg F operating rate
Without built-in suppressor module coil technology
2 to 3 W heat dissipation
70 VA at 68 deg F (20 deg C) (cos ? 0.75) 50/60 Hz inrush power rating
7.5 VA at 68 deg F (20 deg C) (cos ? 0.3) 60 Hz/7 VA at 68 deg F (20 deg C) (cos ? 0.3) 50 Hz hold in power consumption
25 to 400 Hz signaling circuit frequency
5 mA signaling circuit minimum switching current
17 V signaling circuit minimum switching voltage
1.5 ms on energisation between NC and NO contact/1.5 ms on de-energisation between NC and NO contact non-overlap time