| Oblique angle housing design holds trim flush with the ceiling |
| Adjustable socket plate permits lamp to remain perpendicular to floor through entire pitch range |
| Medium base porcelain socket with nickel plated copper screw shell, thermally protected against improper use of lamp |
| Secures in place with factory supplied remodel clips |
| Designed for use in non-insulated areas |
| Housing is vertically adjustable to accommodate up to a 1 in ceiling thickness |
| A19/MR16/BR30/R30/PAR30/PAR30L/PAR38 lamps |
| Housing is secured in place with factory supplied remodel clips |
| Shadow-free, knife edge trim design blends smoothly into the ceiling |
| Angle-cut baffles ensure grooves remain parallel to the floor to provide proper optics |
| Maximum (4) 12 AWG 90 deg C branch circuit conductors |
| Telescoping height for use in 2 x 8 or 2 x 10 in construction |
| The non-IC remodel housing for use in 2/12 to 6/12 pitch slopes, 9 to 27 deg, is ideal for applications where the backside of the ceiling is not accessible |
| The housing is designed to be installed in non-insulated areas or where insulation is spaced at least 3 in from the housing |
