Hubbell Wiring Device-Kellems Insulgrip® HBL430PS2W Grounding Male Watertight Pin & Sleeve Plug, 600 VAC, 30 A, 3 Poles, 4 Wires, Black/Gray
Pin & Sleeve Plugs
377408
MFG #: HBL430PS2W
Hubbell Wiring Device-Kellems
412.30000
/ ea
- Catalog URL - HUBBELL_HBL420P5W_Catalog.pdf(Catalog URL)
- http://www.hubbell-wiring.com/(Seller Home Page URL)
- Install Instructions 1 URL - 11456_0RKWVQB9LNHEF564.pdf(Install Instructions 1 URL)
- Install Instructions 1 URL - WIRING_PD1513_PD1581_INSTALLINST.pdf(Install Instructions 1 URL)
- Line Drawing URL - 11456_1C7J4A2M9D3XP0OR.pdf(Line Drawing URL)
- Line Drawing URL - WDK_HBL430PS2W_DRAWING_PDF.pdf(Line Drawing URL)
- Spec Sheet URL - 11456_STU40M6P1LXGYCBD.pdf(Spec Sheet URL)
- Spec Sheet URL - WIRING_HBL430PS2W_spec.pdf(Spec Sheet URL)
- Warranty URL - 11456_Y8PS6T0FNOGH3Q75.pdf(Warranty URL)
- Warranty URL - Wiring_WDK_Warranty.pdf(Warranty URL)
- Applications
- Features
| Metallic with Nylon Shroud |
| Watertight |
| Rynite® SST35 gland cap |
| Stainless steel (300 series) cord clamp screws |
| Nickel plated brass clamp nut |
| Brass ground, phase sleeve |
| Stainless steel (300 series) assembly screws, Rynite® SST35 cord clamps |
| 0.68 in to 1.05 in cord clamp range and 3/8 to 1.2 in outer diameter cable |
| Neoprene grommet/glands |
| Brass ground standoff |
| Nickel plated spring bronze ground bracket |
| Withstands 3000 VAC dielectric voltage |
| Maximum 30 deg C temperature rise at full rated current after 50 cycles of overload at 150% of rated current at a power factor of 75% temperature rise |
| Up to 1000 connect and disconnect cycles at full rated current and voltage endurance |
| Maximum 30 C temperature rise at full rated current after 50 cycles of overload at 150 percentage of rated current temperature rise |
| Up to 1,000 connect and disconnect cycles at full rated current and voltage endurance |
| Round portable service cords of diameters commensurate with the device rating as defined in UL standard 62, CSA c22.2 NO 49 and the harmonized European standards cord accommodation |
| Terminals identified in accordance with UL1686 (1, 2, 3, green) terminal identification |
| Identification and ratings are a permanent part of the device housing product identification, UL 94 V-0 and CSA c22.2 NO 0.17 flammability, no 10 to 8 AWG copper wire terminal accommodations |