| 10 - 30 VDC job light input; Microcontroller-based photoelectric touch buttons are a cost-effective and easy-to install alternative to capacitive touch switches and mechanical push buttons for error proofing and parts-verification applications; Ergonomically designed to eliminate hand, wrist and arm stresses associated with repeated switch operation, require no physical pressure to operate; LED power and output indicators; Immune to ambient light, EMI and RFI interference; High excess gain cuts through heavy airborne contamination to function in almost any environment; Protected against transient voltages (fast-transient and over-voltage) and reverse polarity; All models protected against false pulse on power-up (outputs held OFF for 1 second at power-up), overload and short-circuits; EMI/RFI immunity: Immune to EMI and RFI noise sources, per IEC 947-5-2 |
| Microcontroller-based photoelectric touch buttons |
| A cost-effective and easy-to install alternative to capacitive touch switches and mechanical push buttons for error proofing and parts-verification applications |
| Ergonomically designed to eliminate hand, wrist and arm stresses associated with repeated switch operation, requires no physical pressure to operate |
| Illuminated base provides a bright, easy-to-see job light in one or two colors, depending on model |
| LED power and output indicators |
| Immune to ambient light, EMI and RFI interference |
| High excess gain cuts through heavy airborne contamination to function in almost any environment |
| One-color job light model |
| Protected against reverse polarity and transient voltage (fast-transient and over voltage |
| Protected against false pulse on power-up (outputs held off for 1 second at power-up), overload and short-circuits |
| Translucent white polycarbonate base, electronics fully epoxy encapsulated |
| Up to 120000 lux (direct sunlight) ambient light immunity |
| 150 mA maximum load output rating |
| Less than 1.5 V at 150 mA on-state saturation voltage /less than10 uA off-state leakage current |
| 4-pin M12/euro style integral quick disconnect cable connection |
| 30 mm mounting thread |
| Normally open actuator operation |
| Integral quick disconnect |
| M12 euro style 4-pin connection |
| One open collector PNP transistor output |
