| Diverse-redundant microcontroller-based photoelectric touch buttons; Continuous internal self-checking operation; Ergonomically designed to eliminate hand, wrist and arm stresses associated with repeated switch operation, require no physical pressure to operate; Immune to ambient light, EMI and RFI interference; High excess gain cuts through heavy contamination; LED power, output and fault indicators; Outputs activate while a finger is in the touch area (yoke) of the switch, interrupting the button's infrared sensing beam; When the STBVP6 is used with Banner's SC22-3 Safety Controller in a two-hand control system, the power supply to the STBVP6 must be of the same voltage that is used to power the Safety controller and they must have a common supply ground; Protected against transient voltages, reverse polarity and against false pulse on power-up, model" |
| Continuous internal self-checking operation |
| Diverse-redundant microcontroller-based photoelectric touch buttons |
| Ergonomically designed to eliminate hand, wrist and arm stresses associated with repeated switch operation; require no physical pressure to operate |
| High excess gain cuts through heavy contamination |
| Immune to ambient light, EMI and RFI interference |
| LED power, output and fault indicators |
| Protected against reverse polarity and transient voltages |
| Protected against false pulse on power-up |
| Electronics fully epoxy-encapsulated fiber reinforced polyester base |
| Power On-power applied/output/fault On-button is activated, Off-button is deactivated, flashing-internal fault or blocked button on power-up detected |
| Up to 100000 lux ambient light immunity |
| 150 mA maximum load output rating |
| 1.5 VAC no full load on-state maximum output voltage/less than 1 uA off-state leakage current |
| PVC jacketed 4-wire 2 m integral cable |
