| Adjustments: Potentiometer; Economical polarized retroreflective sensor in rug- ged, NEMA-6P (IEC IP67) Cycolac ABS housings; Sensing range of 4.6 MR when used with Banner model BRT-3 3 IN retroreflective target; Totally self-contained SPDT electromechanical relay output device; Choice of ON/OFF output or programmable timing logic; Wiring chamber with two conduit entrances for mounting versatility; LED indicators for output on and light sensed; Status Indicator: LEDs, one red and one yellow, both top mounted |
| Economical polarized retroreflective sensor in rug- ged, NEMA-6P (IEC IP67) cycolac ABS housings |
| Sensing range of 4.6 m when used with banner model BRT-3 3 in retroreflective target |
| Totally self-contained SPDT electromechanical relay output device |
| Choice of ON/OFF output or programmable timing logic |
| Wiring chamber with two conduit entrances for mounting versatility |
| LED indicators for output on and light sensed |
| LEDs, one red and one yellow, both top mounted status indicator |
| 12 - 240 VAC/24 - 240 VAC |
| 10 - 55 Hz maximum, double amplitude 0.06 in, acceleration 10G vibration |
| Q85 series self-contained diffuse mode photoelectric sensor |
| Less than 50 uA off-state output leakage |
| 20 ms on/off response time |
| 880 nm infrared LED sensing beam |
| Acrylic lens, 90 percent at 50 deg C (non-condensing) relative humidity |
| 50 million operations mechanical relay, 100000 operations electrical relay at full resistive load |
| Thermoplastic ABS enclosure, SPDT electromechanical relay output |
| Potentiometer adjustments |
