Banner Engineering OTBVN6L Opto-Touch™ OTB Actuator Illuminated Optical Touch Button With Field Cover, 10 to 30 VDC
Optical Touch Buttons/Data Couplers
174383
MFG #: OTBVN6L
BANNER®
153.07000
/ ea
- bannerengineering.com(Seller Home Page URL)
- Compliance Cert URL - Banner_Engineering_OTBVN6L_Compliance_Certificate.pdf(Compliance Cert URL)
- Spec Sheet URL - SPE_66248828149_Spec.pdf(Spec Sheet URL)
- Tech Drawing URL - DRW_66248833706_Tech.pdf(Tech Drawing URL)
- Warranty URL - WAR_Banner_Warranty.pdf(Warranty URL)
- Features
| Banner optical touch buttons are touch-activated photoelectric switches, designed to replace capacitive touch switches and mechanical push buttons; activated for as long as a finger, introduced into the touch area of the switch, interrupts the infrared sensing beam; Banner optical touch buttons are ergonomically designed to eliminate the hand, wrist, and arm stresses associated with mechanical push buttons; They require absolutely no physical pressure to operate; Highly resistant to EMI, RFI, and ambient light interference; Environmental considerations for use of the two types differ; Easily retrofitted to existing machines |
| Zero-force activated photoelectric replacements for mechanical push buttons |
| Momentary action touch buttons with SPDT electromechanical relay |
| Optimized for easy mounting with a 30 mm threaded base |
| Ergonomic design eliminates hand, wrist and arm stress |
| Field covers included to prevent inadvertent activation from loose clothing, debris |
| Highly resistant to both single and mixed EMI and RFI noise sources |
| Protected against reverse polarity and transient voltages |
| 100 ms delay on power-up, outputs do not conduct at this time |
| Protected against false pulse on power-up and continuous overload or short circuit of outputs |
| Two indicator LEDs, one lights whenever power is applied, the other lights whenever the switch is activated |
| Electronics fully epoxy-encapsulated fiber reinforced polyester base |
| Threaded base has M30 x 1.5 external threads and 1/2 in NPSM internal threads |
| Base requires a 1-3/16 in diameter mounting hole (fits most standard automotive size jumbo legend plates and oil tight pushbutton holes) |
| Up to 100000 lux ambient light immunity |
| 150 mA maximum load each output |
| <1 VAC at 10 mA, <1.5 VAC at 150 mA om-state saturation voltage |
| Less than 1ua off-state leakage current |
| PVC jacketed 22 AWG 4-conductor 9 m cable |
| 30 mm diameter mounting thread base |
| Normally open/normally closed operation |