| Banner optical touch buttons are touch-activated photoelectric switches, designed to replace capacitive touch switches and mechanical push buttons; activated for as long as a finger, introduced into the touch area of the switch, interrupts the infrared sensing beam; Banner Optical Touch Buttons are ergonomically designed to eliminate the hand, wrist, and arm stresses associated with mechanical push buttons; They require absolutely no physical pressure to operate; Highly resistant to EMI, RFI, and ambient light interference; Environmental considerations for use of the two types differ; Easily retrofitted to existing machines; With quick disconnect connector |
| Ergonomic design eliminates hand, wrist and arm stress |
| Field covers (black) included to prevent inadvertent activation from loose clothing, debris, etc |
| Optimized for easy mounting with 30 mm threaded base |
| All models are highly resistant to EMI, RFI, and ambient light interference |
| Environmental considerations for use of the two types differ |
| Easily retrofitted to existing machines |
| Infrared LED sensing beam |
| 12000 lux ambient light |
| 0.05 W minimum wattage |
| Mini-type 5-conductor quick disconnect connection |
| Prolonged exposure of the opto-touch to direct outdoor sunlight will cause embrittlement of the polysulfone housing, window glass effectively filters longer wavelength ultraviolet and provides excellent protection from sunlight |
| One lights whenever power is applied; the other lights whenever the switch is activated making the normally-open (NO) output conduct |
| Normally open/normally closed operation |
| 100000 operations (min.) at full resistive load electrical life of relay, 50000000 operations (min.) mechanical life of relay |
| 7 amps (resistive load), 1 Hp maximum switching current, 0.05 W (DC), 0.05 VA (AC) minimum load |
| All models require less than 25 mA (exclusive of load) |
| Protected against reverse polarity and transient voltages |
| All models protected against false pulse on power-up Models with solid-state outputs have overload and short circuit protection |
| Polysulfone housing, fiber-reinforced valox base |
| Thermoplastic polysulfone. 90 percent at 50 deg C (non-condensing). SPDT electromechanical relay |
