| This model offer the simplicity of wiring which is associated with 2-wire sensor design; They wire directly in series with an AC load, exactly like a limit switch; Use of a 2-wire power block requires programming of the sensor head to the 2W (2-wire) operating mode; As a result, MAXI-BEAM sensing response time is fixed at 10 MS for 2-wire operation; Contain an output switch for interfacing to loads or to control circuitry; include status LEDs which continuously indicate the state of the output circuit and input power; Epoxy-encapsulated and rated for -40 to +70 ° C" |
| 50/60 Hz, 2 W exclusive of load input |
| 3/4 A maximum (derated to 1/2 A at 70 deg C) output |
| 10 A for 1 sec non-repeating maximum inrush |
| 5.2 V RMS at a 1/2 A load, 14 V RMS at a load of 10 mA on-state voltage drop |
| Less than 1.7 mA (resistive or inductive load) off-state leakage current |
| Range depends on sensor |
| Wiring chamber |
| 2 m length cable connection |
