Banner Engineering ES-UA-5A ES Series Emergency Stop Safety Module, 4NO-1NC Contact Form
Safety Relays
155666
MFG #: ES-UA-5A
BANNER®
380.38000
/ ea
- bannerengineering.com(Seller Home Page URL)
- Compliance Cert URL - Banner_Engineering_ES_UA_5A_Compliance_Certificate.pdf(Compliance Cert URL)
- Spec Sheet URL - SPE_122365.pdf(Spec Sheet URL)
- Tech Drawing URL - Banner_Engineering_ES_UA_5A_Technical_Drawing.pdf(Tech Drawing URL)
- Warranty URL - WAR_product-warranty.pdf(Warranty URL)
- Features
| 0 |
| Polycarbonate primary housing |
| 20 to 50 mA at 12 to 30 VDC safety input - dual channel (dry contact), 20 to 50 mA at 12 to 30 VDC (dry contact only) safety input - reset |
| Category 4 PLe; SIL 3 design rating |
| 1000000 cycles at 450 VA electrical life |
| 90% at 50 deg C relative humidity |
| Simultaneous or concurrent input operation |
| 4 NO (6 A); 1 NC (5 A) output configuration, 2 PNP |
| 50000000 operations mechanical life |
| 25 ms response time |
| Transient voltage/reverse polarity supply protection |
| 115 VAC +/-15% (A1-A2); 11 - 27.6 VDC (B1-B2) supply voltage |
| 10 to 55 Hz at 0.35 mm vibration; 60 to 150 Hz at 5 g maximum |
| AgNi 5 um gold-plated contacts |
| 2 pollution degree |
| 350 ms recovery time |
| Monitors emergency stop devices, such as palm buttons and rope/cable pulls, and positive-opening safety switches used for guard/gate interlocking |
| Four normally open output switching channels for connection to control-reliable power interrupt circuits and three auxiliary output channels |
| Automatic reset or monitored manual reset |
| For use in function stop category 0 application per ANSI NFPA 79 and IEC/EN60204-1 |
| 6 A safety output contacts; 5 A auxiliary output contacts |