Appleton® FRN2C2408SBU Ceiling Lighting Fixture, 2 Fluorescent Lamp, 120 to 277 VAC, White Housing
Outdoor Ceiling Lighting
397356
MFG #: FRN2C2408SBU
Appleton™
899.28000
/ ea
- http://www.appletonelec.com(Seller Home Page URL)
- https://www.appleton.emerson.com/(Seller Home Page URL)
- Owners Manual URL - Appleton_FRN2C2408SBU_Manual.pdf(Owners Manual URL)
- Spec Sheet 1 URL - Appleton_FRN2C2408SBU_Specification_Sheet_1.pdf(Spec Sheet 1 URL)
- Spec Sheet URL - 11043_SPE_781381090025_spec.pdf(Spec Sheet URL)
- Warranty URL - 11043_AFRVNTEYP0B9JHS4.pdf(Warranty URL)
- Warranty URL - appleton-grp-terms-and-conditions.pdf(Warranty URL)
- Applications
- Features
For Use In Wet Locations, Areas Where High Humidity Or Water Vapor Are Present, Indoors Or Outdoors In Protected Locations, Meat Or Food Processing Plants, Dairy Or Drug Plants, Breweries, Kitchens, Chemical Plants, Car Washes, Laundries And Parking Garages |
Low operating costs provide more lumens per watt than incandescent fixtures; Housing is smooth, seamless, one-piece injection molded; Lens comes in impact-resistant acrylic to protect lamps against breakage and protect work area from broken lamp glass; Fixtures are washable, non-conductive and corrosion-resistant; Lens is securely clamped to fixture using six captive corrosion-proof molded white celcon tension latches; Electrical components are mounted on a metallic wireway; Reflector is supported by internal safety springs to simplify installation and servicing; A compressible, one piece, non-thixotropic polyol gasket is bonded to the housing around the entire perimeter to form a continuous seal with the lens; For use in locations where a high degree of corrosion resistance is required; 4 FT fluorescent lamp |
Low operating costs provide more lumens per Watt than incandescent fixtures |
Housing is smooth, seamless, one-piece injection molded |
Lens comes in high impact polycarbonate plastic or impact resistant acrylic |
Fixtures are washable, non-conductive and corrosion resistant |
Enclosure is rated at IP65 dust-proof and protected against water spray |
Electrical components are mounted on a metallic wireway |
Non-metallic fluorescent luminaire |
Celcon latches, stainless steel ceiling mounting bracket, polycarbonate lampholders , zinc plated steel with neoprene o-ring hub material |
38 deg c ambient temperature |
Acrylic lens material |
50/60 Hz frequency |
1/2 in conduit entry |
2 number of hubs |
1 ballast quantity |
Universal design for flood and high bay mounting |
Cool operating temperatures translate into long luminaire life |
Prismatic glass lens|Fiberglass reinforced polyester material |