Milwaukee® 49-57-8323 Quick-Change, 1-3/8 in Dia, 3/16 in THK Cut, Carbide Bit
Hole Saws
218749
MFG #: 49-57-8323
Milwaukee®
52.75000
/ ea
- Alternate Catalog Number: 49578323
- ARRA Compliant: C
- Buy American Compliant: C
- Catalog Number: 49-57-8323
- Country of Origin: JP
- Currency: USD
- Cutting Size: 3/16 IN Depth
- Drill Size: 3/8 in Dia x 2-3/4 in L
- EU RoHS Indicator: C
- Gross Volume Per Pack: 0.18
- Gross Weight Per Pack: 0.1900 lb
- Gross Weight per Pack Metric: 0.08
- Gross Weight UOM Metric: kg
- Harmonization Tariff Schedule Code: 6210405020
- Height: 2.10 in
- Height [Metric]: 5.3340 cm
- Hole Diameter: 1-3/8 in
- Length: 2.50 in
- Length [Metric]: 6.3500 cm
- Series: 49-57
- Shank Size: 3/8 in
- Standards: ARRA CompliantBuy American Act Compliant
- Sub Brand: MILWAUKEE
- Teeth Per Inch: 2
- TPI or Pitch: 4
- Type: Quick-Change
- UNSPSC: 27112826
- UPC 11: 04524220568
- UPC 12: 045242205684
- Use Arbor: 49-57-0035 Quick-Change Arbor
- Warranty Description: None
- Width: 2.50 in
- Width [Metric]: 6.3500 cm
- Stock Status: NONSTOCK
- Brand: Milwaukee®
- Manufacturer: Milwaukee Tool
- Applicable Materials: Mild Steel and Stainless Steel
- Cutting Depth: 3/16 in
- Cutting Edge Material: Carbide
- Diameter: 1-3/8 in
For materials up to 3/16 in, these carbide tipped sheet metal Hole Saws produce fine holes in stainless steel or structural steel studs. They can also improve your production in brass, aluminum and other thin sheet materials. Can be used in hand held drills to achieve drill press quality holes. Lubrication during drilling extends the life of the carbide. Milwaukee® recommends the use of Hawg Wash® cutting fluid for best results. Hawg Wash® fluid is available in 16 ounce bottles (49-32-0081). One bottle makes one gallon of lubricating solution. 2-1/4 in diameter.
- Features
| 1-3/8 IN Bit Diameter; For Use With Quick Change Arbor 49-57-0035; 3/16 IN Cutting Depth |
| One arbor fits all cutters |
| Ability to pre-drill pilot holes and then attach cutter |
| Stays sharp longer than HSS or bi-metal cutters |
| Multiple teeth reduce load, less cutting force required |
| Improves production in brass, aluminum and other thin sheet materials |
| Replacement arbor No. 49-57-0035 and replacement pilot drill No. 49-57-0038 |
| 3/16 in Cutting depth |
| 4 Teeth |