Sandvik Coromant 5963296 CoroMill® Plura Ball Nose End Mill, 0.078 in, 0.066 in Max Depth of Cut, 2 Flutes, 0.236 in Shank, 1.771 in OAL
Ball End Mills
1243811
MFG #: 5963296
Sandvik Coromant
167.94000
/ ea
- Alternate Catalog Number: R216.42-02030-EC20G 1700
- ANSI Code: R216.42-02030-EC20G 1700
- Catalog Number: 5963296
- Country of Origin: JP
- Cutting Direction: Right Hand
- Gross Weight Per Pack: 4.4100 lb
- Helix Angle: 30 deg
- ISO Code: R216.42-02030-EC20G 1700
- Item Group: 730
- Material: Solid Carbide
- Maximum Depth of Cut: 0.066 in
- Series: CoroMill® Plura
- Shank Type: Cylindrical
- Standards: DIN1835-A|DIN6535-HA
- Type: Ball Nose
- UPC 11: 69826254568
- Stock Status: NONSTOCK
- Brand: Sandvik Coromant
- Manufacturer: Sandvik Coromant
- Cutter Diameter: 0.078 in
- Finish: PVD Coated
- Number of Flutes: 2
- Overall Length: 1.771 in
- Shank Diameter: 0.236 in
Sandvik Coromant End Mill, Ball Nose, Series: CoroMill® Plura, 0.078 in Cutter Dia, 1.771 in Overall Length, 0.066 in Maximum Depth of Cut, 2 Flutes, 0.236 in Shank Dia, Right Hand Cutting, 30 deg Helix Angle, Cylindrical Shank, ANSI Code: R216.42-02030-EC20G 1700, ISO Code: R216.42-02030-EC20G 1700, Solid Carbide, PVD Coated
- Features
| 1700 manufacturer grade |
| 1.92 mm Dia body |
| 0 deg body half taper |
| Straight chip breaker |
| 3 mm L body |
| 1 cutting length |
| Without coolant entry |
| No coolant exit |
| 1.92 mm Dia neck |
| SFW (EFW) feed direction |
| Right helix flute hand |
| -6 deg radial rake |
| 1.5 deg axial rake |
| 3 mm L usable |
| 9 mm overhang |
| 0 deg lead |
| 1 mm corner radius |
| 15 deg ramping |
| 80000 r/min |
| 20 life cycle state |