Valenite Tiger-tec® Silver 7054178 Positive Single Sided Turning Insert, SCMT3(2.5)1-MM4 WSM30S ANSI, Square, Carbide
SCMT Turning Inserts
PDW~12584707
MFG #: SCMT3(2.5)1-MM4WSM30S
Walter (Valentine)
12.90000
/ ea
- ANSI Code: SCMT3(2.5)1-MM4 WSM30S
- Catalog Number: SCMT3(2.5)1-MM4WSM30S
- Corner Radius: 0.4 mm
- Finish: PVD-TiAlN+Al2O3 Coated
- Gross Weight Per Pack: 1 lb
- Hole Diameter: 0.173 in
- Included Angle: 90 °
- ISO Code: SCMT09T304-MM4 WSM30S
- Length: 9.525 mm
- Relief Angle: 7 °
- Series: Tiger-tec® Silver
- Sub Brand: Tiger-tec®
- Thickness: 3.97 mm
- Width: 9.525 mm
- Stock Status: NONSTOCK
- Brand: Walter (Valentine)
- Manufacturer: Walter
- Chipbreaker: MM4
- Cutting Direction: Neutral
- For Use On: Stainless Steel and Steel
- Inscribed Circle: 9.525 mm
- Insert Size: 3(2.5)1
- Insert Style: SCMT
- Manufacturer's Grade: WSM30S
- Material: Carbide
- Material Grade: M, P
- Maximum Depth of Cut: 3 mm
- Rake: Positive
- Seat Size: 09
- Shape: Square
With Tiger-tec® Silver, Walter is offering a world first in coating technology for indexable inserts. The special aluminium oxide layer with optimized microstructure reduces wear during turning, milling and drilling operations and increases toughness and temperature resistance for significantly higher cutting data.
- Features
U chipbreaker - good chip control at low feed rate and varied radial depth of cut with low cutting force |
Suitable for automatic lathes |
Low feed |
Sharp edge |
TN60 grade general purpose cermet with superior wear resistance and toughness |
Cutting of steel and stainless steel |
0.08 to 0.202 mm corner point tolerance |
+/-0.13 mm thickness tolerance |
0.05 to 0.152 mm inscribed circle tolerance |
0.08 to 0.25 mm feed/rev |
9.52 mm cutting edge length |
11 deg rake |