Sandvik Coromant 6612438 CoroTurn® 107 Basic Shape Positive Turning Insert, SCMT 433-PR 4315, S-Square, SCMT Insert, 4315
SCMT Turning Inserts
1238564
MFG #: 6612438
Sandvik Coromant
19.71000
/ ea
- Alternate Catalog Number: SCMT 433-PR 4315
- ANSI Code: SCMT 433-PR 4315
- Catalog Number: 6612438
- Corner Radius: 0.0468 in
- Country of Origin: SE
- Finish: CVD-TiCN+Al2O3+TiN Coated
- Gross Weight Per Pack: 0.2000 lb
- Hole Diameter: 0.2165 in
- Included Angle: 90 °
- ISO Code: SCMT 12 04 12-PR 4315
- Item Group: 122
- Length: 1/2 in
- Relief Angle: 7 °
- Series: CoroTurn® 107
- Thickness: 0.187 in
- Width: 1/2 in
- Stock Status: NONSTOCK
- Brand: Sandvik Coromant
- Manufacturer: Sandvik Coromant
- Chipbreaker: PR
- Cutting Direction: Neutral
- For Use On: Cast Iron and Steel
- Inscribed Circle: 1/2 in
- Insert Size: 433
- Insert Style: SCMT
- Manufacturer's Grade: 4315
- Material: Carbide
- Material Grade: K, P
- Maximum Depth of Cut: 4.8 mm
- Rake: Positive
- Seat Size: 12
- Shape: Square
Sandvik Coromant Turning Insert, Basic Shape Positive, Series: CoroTurn® 107, SCMT Insert, S-Square, 4.8 mm Maximum Depth of Cut, 1/2 in Inscribed Circle, 0.1874 in Thickness, 1/2 in Length, PR Chipbreaker, 0.0468 in Corner Radius, 0.2165 in Hole Dia, Manufacturer's Grade: 4315, ANSI Code: SCMT 433-PR 4315, ISO Code: SCMT 12 04 12-PR 4315, 90 deg Included Angle, 7 deg Relief Angle, Neutral Hand, Carbide, MTCVD Coated, Material Grade: K/P
- Features
| T8330 grade sub-micron substrate with a relatively high cobalt content |
| Nano-layered PVD coating with gradient transitions |
| Lower internal coating tension with higher hardness |
| Lower notch wear on the main cutting edge |
| Medium cutting speeds |
| Good operative reliability |
| Impaired machining conditions |
| The screw clamping ensures stability and unobstructed chip flow |
| 0.17 - 0.5 mm/r cutting feed |
| 20 life cycle state |