Sandvik Coromant 5749190 CoroTurn® 107 1-Sided Turning Insert, SCMT 433-PM 4215, S-Square, SCMT-PM Insert, 4215, Carbide
SCMT Turning Inserts
1250800
MFG #: 5749190
Sandvik Coromant
18.89000
/ ea
- ANSI Code: SCMT 433-PM 4215
- Catalog Number: 5749190
- Corner Radius: 0.0468 in
- Country of Origin: SE
- Finish: MTCVD Coated
- Gross Weight Per Pack: 0.0200 lb
- Hand of Insert: Neutral
- Hole Diameter: 0.2165 in
- Included Angle: 90 deg
- ISO Code: SCMT 12 04 12-PM 4215
- Length: 1/2 in
- Relief Angle: 7 deg
- Series: CoroTurn® 107
- Thickness: 0.1874 in
- Type: 1-Sided
- UPC 11: 69826240134
- Width: 12.7 mm
- Width UOM: IN
- Stock Status: NONSTOCK
- Brand: Sandvik Coromant
- Manufacturer: Sandvik Coromant
- Chipbreaker: PM
- Cutting Direction: Neutral
- For Use On: Cast Iron, Stainless Steel and Steel
- Inscribed Circle: 1/2 in
- Insert Size: 12.7 mm
- Insert Style: SCMT-PM
- Manufacturer's Grade: 4215
- Material: Carbide
- Material Grade: P
- Maximum Depth of Cut: 0.96 mm
- Rake: Positive
- Seat Size: 12
- Shape: S-Square
Sandvik Coromant Turning Insert, 1-Sided, Series: CoroTurn® 107, SCMT-PM Insert, S-Square, 0.96 mm Maximum Depth of Cut, 1/2 in Inscribed Circle, 0.1874 in Thickness, 1/2 in Length, PM Chipbreaker, 0.0468 in Corner Radius, 0.2165 in Hole Dia, Manufacturer's Grade: 4215, ANSI Code: SCMT 433-PM 4215, ISO Code: SCMT 12 04 12-PM 4215, 90 deg Included Angle, 7 deg Relief Angle, Neutral Hand, Carbide, MTCVD Coated, Material Grade: P
- Features
| 7 deg major clearance |
| E cutting edge condition |
| 4 cutting edges |
| 40 - 60 deg countersunk hole and non-flat surface clamping interface |
| 11.5 mm L effective cutting edge |
| M tolerance class |
| 0.14 - 0.43 mm/r cutting feed |
| 30 life cycle state |
| Sharp cutting edges and excellent chip control ensure a soft cutting action and low cutting forces, providing an excellent surface finish to the component |
| 7 deg clearance angle |
| Screw clamping ensures stability and unobstructed chip flow |
| Holders and insert geometries with conventional and CoroTurn HP design |
| For longitudinal turning and profiling |
| Positive rake |
| Screw clamp mount |