Valenite Tiger-tec® Silver 6169063 Center Sintered Indexable Drilling Insert, P4841C-2R-E57 WKP35S ANSI, Square
P484 Drilling Inserts
PDW~9956258
MFG #: P4841C-2R-E57WKP35S
Walter (Valentine)
15.20000
/ ea
- ANSI Code: P4841C-2R-E57 WKP35S
- Catalog Number: P4841C-2R-E57WKP35S
- Country of Origin: DE
- Finish: CVD Coated
- Gross Weight Per Pack: 1 lb
- Hand of Insert: Right
- Included Angle: 90 °
- ISO Code: P4841C-2R-E57 WKP35S
- Length: 5.95 mm
- Sub Brand: Tiger-tec®
- Thickness: 2.38 mm
- Type: Center Sintered
- Width: 5.95 mm
- Stock Status: NONSTOCK
- Brand: Walter (Valentine)
- Manufacturer: Walter
- Chipbreaker: E57
- Corner Radius: 0.34 mm
- For Use On: Cast Iron, High Temperature Alloys, Non-Ferrous Metals, Steel, Stainless Steel and Titanium Alloys
- Inscribed Circle: 5.95 mm
- Insert Size: 2
- Insert Style: P484
- Manufacturer's Grade: WKP35S
- Material: Carbide
- Material Grade: K, M, N, P, S
- Series: Tiger-tec® Silver
- Shape: Square
With Tiger-tec® Silver, Walter offers a coating technology for indexable inserts that is unique worldwide, recognizable by the designation key "-S" at the end of the grade description - The special aluminium oxide layer with optimized microstructure reduces wear during turning, milling and drilling operations and increases toughness and temperature resistance at the same time. This enables users to achieve significantly higher cutting data.
- Features
E57 geometry - the universal one |
For moderate machining conditions |
For cast iron and steel, but also for stainless materials and materials that are difficult-to cut |
Center insert - Tiger-tec® silver - the cutting tool material for maximum tool life and maximum process reliability when drilling in ISOP and ISOK materials |
Specially designed for the requirements of a centre insert |
Outer indexable insert with increased wear resistance thanks to unique aluminum oxide layer, ideal for use as a peripheral cutting edge |
Tougher than previous Tiger-tec® CVD coatings |
Optimised residual strength and a combination of toughness and wear resistance make this the first choice for a centre insert |
Low wear due to extremely smooth rake face |
13 deg rake |
11 deg clearance |