WattStopper® WS-250-W Wall Mount Occupancy Sensor, 120/277 VAC, Passive Infrared Sensor, 525 sq-ft Coverage, 180 deg
Occupancy Sensors
564966
MFG #: WS-250-W
WattStopper®
52.97000
/ ea
- Catalog Number: WS-250-W
- Country of Origin: CN
- Gross Weight Per Pack: 0.3000 lb
- Standards: cUL ListedUL 244AUL 508
- UNSPSC: 39122236
- UPC 11: 75418292306
- UPC 12: 75418292306
- Stock Status: NONSTOCK
- Brand: WattStopper®
- Manufacturer: Legrand
- http://www.passandseymour.com(Seller Home Page URL)
- Install Instructions URL - ID-INS-v1-ws-install-ws250_09266r5.pdf(Install Instructions URL)
- Spec Sheet URL - ws-cutsheet-ws-250-passive-infrared-wall-switch-sensor_29004.pdf(Spec Sheet URL)
- Tech Drawing URL - ws-250.aspx#.UHyIBnq8HTo(Tech Drawing URL)
- Video - https://www.youtube.com/embed/qsVCQV9uGKM(Video)
- Warranty URL - IDW_DOCUMENT_1520608267806.pdf(Warranty URL)
- Features
| Passive Infrared |
| Time delay adjustments - 5 - 30 min at minimum, 3 min if no activity after 30 sec at walk-through Mode, 5 sec for 10 min with DIP switch setting at test mode |
| Minimum to maximum sensitivity adjustment |
| 0 - 1000 VA tungsten, ballast, e-ballast and LED driver, 1/4 hp motor load requirement for each relay at 120 VAC and 0 - 1800 VA ballast, e-ballast and LED, load requirement for each relay at 277 VAC |
| Pulse count processing eliminates false offs without reducing sensitivity |
| Detection signature processing eliminates false triggers and provides immunity to RFI and EMI |
| Zero crossing circuitry reduces stress on the relay and results in increased sensor life |
| Time delay adjustment from 30 seconds up to 30 minutes |
| Adjustable unit sensitivity from 20% to 100% |
| Light level sensor holds lights-off when ambient lighting is above the preset level |
| Custom two-tier fresnel lens enhances detection at the desktop level |
| Sensor coverage tested to NEMA guide Publication WD 7-2000 |
| Patented voltage drop protection |
| For safety, there is no leakage to load in the off mode and sensor is safety grounded |
| LED indicates occupancy detection |
| Compatible with decorator wall plates |
| Tungsten ballast/e-ballast load type |