Appleton® MLDL152J5NMT Mercmaster III ML Series Enclosed Gasketed Low Profile Outdoor Luminaire With 8 in NEMA 5 Glass Refractor

Explosion Proof Outdoor Lighting
420655 MFG #: MLDL152J5NMT
Appleton™
1711.79000 / ea
11043_PIC_MLDL102G1GMT
  • Amperage Rating: 2/1.15/1/0.85 A Starting, 1.7/0.95/0.85/0.72 A Operating A
  • ARRA Compliant: N
  • Ballast Type: High Reactance High Power Factor Autotransformer (HX-HPF)
  • Buy American Compliant: N
  • Catalog Number: MLDL152J5NMT
  • Country of Origin: MX
  • Currency: USD
  • Dimensions: 5.59 in H x 12.06 in W
  • Enclosure Type: NEMA 4X/IP66
  • EU RoHS Indicator: C
  • Gross Weight Per Pack: 12.3000 lb
  • Housing Material: Cast Copper Free Aluminum
  • Lamp Base: Medium
  • Lamp Wattage: 150 W
  • Length: 12.06 in
  • Lumens: 16000 Lumens
  • Material: Stainless Steel Hardware And Latch Assembly, Cast Copperfree (4/10 Of 1 PCT Maximum) Aluminum Mounting Hood And Body
  • Mounting Type: Pendant Cone Hood/Rigid
  • Series: ML Series
  • Standard: Class I, Division 2, Groups A, B, C, D; Class I, Zone 2, AEx nA nR IIC (Z2); Class I, Zone 2, Ex nR IIC (Z); Class I, Zone 2, AEx nR IIC (ZB); Class II, Division 1 And 2, Groups E, F, G; Class III; UL 1598A, 60079-15, 844; CSA LR25428
  • Sub Brand: Mercmaster III
  • Type: Enclosed Gasketed Low Profile
  • UNSPSC: 39111524
  • UPC 11: 78138166165
  • UPC 12: 781381661652
  • Width: 12.06 in
  • Stock Status: NONSTOCK
  • Brand: Appleton™
  • Manufacturer: Appleton
  • Fixture Wattage: 188 W
  • Housing Finish: Baked Gray Epoxy Clad Powder Coated
  • Lamp Type: High Pressure Sodium
  • Voltage Rating: 120 to 277 VAC
  • Number Of Lamps: 1
QTY
Add to Wishlist
  • Applications
  • Features
Enclosed And Gasketed Fixtures Suitable For Use In Marine And Wet Locations, And In A Wide Range Of Industrial, Chemical Processing And Other Areas Where Flammable Gases And Vapors Or Combustible Dusts Are Present, Areas Of Low Clearance, Low Ceiling Heights Or Where Fixture Weights Must Be Minimized, R Use In Non-Hazardous Locations Where Severe Weather Conditions, Excessive Moisture, Dirt, Dust Or Corrosive Atmospheres Are Present, Oil Refineries, Pulp And Paper Mills, Chemical Plants, Food-Processing Areas, Inspection Facilities, Foundries, Power Plants, Storage Areas, Waste And Sewage Treatment, Parking Garages, And Other Areas Where Dust, Water, Dirt And Rough Usage Are A Problem
The Mercmaster III series provides a wide selection of high quality enclosed and gasketed luminaires for use in demanding industrial environments and hazardous locations; Compact light weight low profile design is suited for low mounting heights in conjunction with lower wattage fixtures; Modular design allows scores of fixture component combinations to meet installation and lighting needs; Hinge has high lip for added safety during installation and servicing; Hinge and bolt construction ensures 360 DEG compression at all points on ballast housing gasket for positive sealing; Swing away design of captive bolt and nut simplifies servicing; Fixtures are for use in Class I, Zone 2 hazardous locations
Compact lightweight low profile design is suited for low mounting heights in conjunction with lower wattage fixtures
Modular design allows scores of fixture component combinations to meet installation and lighting needs
A choice of heat-resistant prismatic glass refractors (NEMA I, III or V) or heat-resistant globes which thread directly into ballast housing
Standard dome or 30 deg angle reflectors made of fiberglass reinforced white polyester, highly resistant to corrosive atmospheres
Hinge has high lip for added safety during installation and servicing
Hinge and bolt construction ensures 360 deg compression at all points on ballast housing gasket for positive sealing
Swing away design of captive bolt and nut simplifies servicing
All Mercmaster™ III mounting hoods have provision for easy field installation of fuses in fixtures
Fixtures are for use in Class I, Zone 2 hazardous locations
No seals or putty required, reducing installation time and errors
2 A at 120 VAC, 1.15 A at 208 VAC, 1 A at 240 VAC, 0.85 A at 277 VAC starting, 1.7 A at 120 VAC, 0.95 A at 208 VAC, 0.85 A at 240 VAC, 0.72 A at 277 VAC operating
Mounting hoods, bodies and guard are cast copperfree (4/10 of 1% max) aluminum
All hardware and catch assemblies are stainless steel
Mounting hoods, bodies and guards are baked gray epoxy clad finish, electrostatically applied for complete uniform protection
Heat-resistant prismatic glass refractor
2 hub, 3/4 in NPT threaded hub
No guard option
40 deg C ambient temperature, 90 deg C supply wire temperature