Juno® TL601E-60-WH Trac 12™ TL601E Electronic Transformer, 0.5 A, 12 VAC, 60 W, 20 KHz, Lead Wire, 0.98

Track Lighting Transformers
447176 MFG #: TL601E 60W 120 12AC WH
Juno®
152.46000 / ea
  • Alternate Catalog Number: 245F3U
  • Application: Cove Lighting; Display and Casework; Trac Lighting; Undercabinet
  • ARRA Compliant: C
  • Buy American Compliant: Y
  • Catalog Number: TL601E 60W 120 12AC WH
  • Color: White
  • Country of Origin: US
  • Currency: USD
  • Dimensions: 5-1/2 in L x 1-1/2 in W x 1 in H
  • EU RoHS Indicator: C
  • Finish: Polyester Coated
  • Fixture Finish: White
  • Gross Weight Per Pack: 0.9100 lb
  • Gross Weight per Pack Metric: 0.41
  • Gross Weight UOM Metric: kg
  • Height: 13.10 in
  • Height [Metric]: 33.2740 cm
  • Length: 21.70 in
  • Length [Metric]: 55.1180 cm
  • Material: Steel
  • Mounting Type: Surface
  • Series: TL601E
  • Standards: UL/cUL Listed
  • Sub Brand: Juno
  • Temperature Rating: 50 °C
  • Type: 1-Circuit Low Voltage
  • UNSPSC: 39111508
  • UPC 11: 66120922266
  • UPC 12: 661209222664
  • Voltage Rating: 12 VAC
  • Warranty Description: 1 Year Limited. Warranty varies by product. See warranty information at: www.acuitybrands.com/resources/terms-and-conditions
  • Width: 14.20 in
  • Width [Metric]: 36.0680 cm
  • Stock Status: NONSTOCK
  • Brand: Juno®
  • Manufacturer: Acuity Brands
  • Electrical Ratings: 0.5 A, 12 VAC, 60 W
  • Frequency Rating: 20 kHz
  • Power Factor: 1.00
QTY
  • Applications
  • Features
Cove Lighting; Display and Casework; Trac Lighting; Undercabinet
120 VAC input voltage
15 % total harmonic distortion
Ideally suited for driving Juno trac 12 LED fixtures
LED compatible
Use for short to medium run lengths and low to medium wattage systems
Rated for 0.5-65 W total load
For optimal results, use dimmers specifically designed for use with electronic transformers
Install surface mount units in well-ventilated location where ambient temperature will not exceed 120 deg F
May also be used to operate low wattage incandescent load
Transformers used with Juno LED fixtures should only be operated with dimmers pre-qualified for suitability by Juno Engineering
Replaceable fuse on primary
Must be mounted within 18 in of trac feed point
Terminal block wiring connections for faster, simpler installation
17-in nominal sleeved, stripped, and tinned lead-wires provided to connect output to trac feed connector
Low profi le 1-inch overall height
Ground screw for simple ground wire attachment and two 1/2-inch No. 6 wood screws for mounting to wood surfaces
To avoid excessive voltage drop, maximum trac LED from driver is 21 feet
Direct-wire versions supplied with die-cast fitting for 3/8-inch flexible metal conduit