Banner Engineering VTBP6Q VTB Ergonomic Handle Optical Touch Button, 12 to 30 VDC, 100 ms On/Off Response Time

Optical Touch Buttons/Data Couplers
157587 MFG #: VTBP6Q
BANNER®
178.74000 / ea
Banner_VTBP6RQ
  • Catalog Number: VTBP6Q
  • Color: Green
  • Connection Type: 4-Pin M12
  • Country of Origin: USA
  • Enclosure Type: NEMA 1/3/4/4X/12/13/IP66
  • Environmental Conditions: 90% at 55 deg C Non-Condensing Relative Humidity
  • Gross Weight Per Pack: 1 lb
  • Indicator LEDs: (2) Green
  • Mounting Type: Threaded Base
  • Operating Temperature: -20 to 50 °C
  • Output Type: PNP
  • Series: VTB
  • Size: 30 mm Dia x 59.9 mm L
  • Standards: CE Certified
  • Type: Ergonomic Handle
  • UNSPSC: 39121528
  • UPC 11: 66248867505
  • UPC 12: 66248867505
  • Stock Status: NORMALLY STOCKED
  • Brand: BANNER®
  • Manufacturer: Banner Engineering Corp.
  • Connection Size: M12x1
  • Material: Thermoplastic Polysulfone
  • Response Time: 100 ms On/Off
  • Voltage Rating: 12 to 30 VDC
QTY
Add to Wishlist
  • Features
10 - 30 VDC job light input; Microcontroller-based photoelectric touch buttons are a cost-effective and easy-to install alternative to capacitive touch switches and mechanical push buttons for error proofing and parts-verification applications; Ergonomically designed to eliminate hand, wrist and arm stresses associated with repeated switch operation, require no physical pressure to operate; LED power and output indicators; Immune to ambient light, EMI and RFI interference; High excess gain cuts through heavy airborne contamination to function in almost any environment; Protected against transient voltages (fast-transient and over-voltage) and reverse polarity; All models protected against false pulse on power-up (outputs held OFF for 1 second at power-up), overload and short-circuits; EMI/RFI immunity: Immune to EMI and RFI noise sources, per IEC 947-5-2
Microcontroller-based photoelectric touch buttons
A cost-effective and easy-to install alternative to capacitive touch switches and mechanical push buttons for error proofing and parts-verification applications
Ergonomically designed to eliminate hand, wrist and arm stresses associated with repeated switch operation, requires no physical pressure to operate
Illuminated base provides a bright, easy-to-see job light in one or two colors, depending on model
LED power and output indicators
Immune to ambient light, EMI and RFI interference
High excess gain cuts through heavy airborne contamination to function in almost any environment
One-color job light model
Protected against reverse polarity and transient voltage (fast-transient and over voltage
Protected against false pulse on power-up (outputs held off for 1 second at power-up), overload and short-circuits
Translucent white polycarbonate base, electronics fully epoxy encapsulated
Up to 120000 lux (direct sunlight) ambient light immunity
150 mA maximum load output rating
Less than 1.5 V at 150 mA on-state saturation voltage /less than10 uA off-state leakage current
4-pin M12/euro style integral quick disconnect cable connection
30 mm mounting thread
Normally open actuator operation
Integral quick disconnect
M12 euro style 4-pin connection
One open collector PNP transistor output