Banner Engineering STBVR81Q6 STB Self-Checking Optical Touch Button With Field Cover, 20 to 30 VAC/VDC, 20 ms Response Time
Optical Touch Buttons/Data Couplers
306145
MFG #: STBVR81Q6
BANNER®
165.43000
/ ea
- Catalog Number: STBVR81Q6
- Color: Black
- Connection Type: 5-Pin Cable
- Country of Origin: UA
- Enclosure Type: NEMA 1/3/4/4X/12/13/IP66
- Environmental Conditions: 90% at 55 deg C Non-Condensing Maximum Relative Humidity
- Gross Weight Per Pack: 1 lb
- Indicator LEDs: (2) Green
- Mounting Type: Threaded
- Operating Action: Momentary
- Operating Temperature: 0 to 50 °C
- Output Type: Complementary Relay
- Series: STB
- Size: 2.36 in L x 1.7 in W
- Standards: CE Marked, CSA Certified, UL Listed
- Type: Self-Checking
- UNSPSC: 39121528
- UPC 11: 66248864192
- UPC 12: 66248864192
- Stock Status: NORMALLY STOCKED
- Brand: BANNER®
- Manufacturer: Banner Engineering Corp.
- Connection Size: M12
- Material: Polyetherimide
- Response Time: 20 ms
- Voltage Rating: 20 to 30 VAC//VDC
- bannerengineering.com(Seller Home Page URL)
- Compliance Cert URL - Banner_Engineering_STBVP6Q_Compliance_Certificate.pdf(Compliance Cert URL)
- Spec Sheet URL - SPE_66248864180_Spec.pdf(Spec Sheet URL)
- Tech Drawing URL - DRW_66248864192_Tech.pdf(Tech Drawing URL)
- Warranty URL - WAR_Banner_Warranty.pdf(Warranty URL)
- Features
| Continuous internal self-checking operation; Diverse-redundant microcontroller-based photoelectric touch buttons; Ergonomically designed to eliminate hand, wrist and arm stresses associated with repeated switch operation; require no physical pressure to operate; High excess gain cuts through heavy contamination; Immune to ambient light, EMI and RFI interference; Yellow field cover included; All models protected against false pulse on power-up. Models with solid-state outputs have overload and short circuit protection; Protected against reverse polarity and transient voltages |
| Continuous internal self-checking operation |
| Diverse-redundant microcontroller-based photoelectric touch buttons |
| Ergonomically designed to eliminate hand, wrist and arm stresses associated with repeated switch operation; require no physical pressure to operate |
| High excess gain cuts through heavy contamination |
| Immune to ambient light, EMI and RFI interference |
| LED power, output and fault indicators |
| Protected against reverse polarity and transient voltages |
| Protected against false pulse on power-up |
| Electronics fully epoxy-encapsulated fiber reinforced polyester base |
| Power On-power applied/output/fault On-button is activated, Off-button is deactivated, flashing-internal fault or blocked button on power-up detected |
| Up to 100000 lux ambient light immunity |
| 150 mA maximum load output rating |
| 125 VDC/150 VAC maximum switching voltage/1 A at 24 VDC, 0.4 A at 125 VAC (resistive loads) maximum switching voltage current/24 W DC/50 VA AC maximum resistive power |