Banner Engineering STBVR81 STB Self-Checking Optical Touch Button With Field Cover, 20 to 30 VAC/VDC, 20 ms Response Time

Optical Touch Buttons/Data Couplers
204718 MFG #: STBVR81
BANNER®
163.02000 / ea
Banner_Engineering_STBVP6Q
  • Catalog Number: STBVR81
  • Color: Black
  • Connection Type: Cable
  • Country of Origin: USA
  • Enclosure Type: NEMA 1/3/4/4X/12/13/IP66
  • Environmental Conditions: 90% at 55 deg C Non-Condensing Maximum Relative Humidity
  • Gross Weight Per Pack: 0.6650 lb
  • Indicator LEDs: (2) Green
  • Mounting Type: Threaded
  • Operating Action: Momentary
  • Operating Temperature: 0 to 50 °C
  • Output Type: Complementary Relay
  • Series: STB
  • Size: 2.36 in L x 1.7 in W
  • Standards: CE Marked, CSA Certified, UL Listed
  • Type: Self-Checking
  • UNSPSC: 39121528
  • UPC 11: 66248864190
  • UPC 12: 66248864190
  • Stock Status: NORMALLY STOCKED
  • Brand: BANNER®
  • Manufacturer: Banner Engineering Corp.
  • Material: Polyetherimide
  • Response Time: 20 ms
  • Voltage Rating: 20 to 30 VAC//VDC
QTY
Add to Wishlist
  • Features
Diverse-redundant microcontroller-based photoelectric touch buttons; Continuous internal self-checking operation; Ergonomically designed to eliminate hand, wrist and arm stresses associated with repeated switch operation, require no physical pressure to operate; Immune to ambient light, EMI and RFI interference; High excess gain cuts through heavy contamination; LED power, output and fault indicators; Outputs activate while a finger is in the touch area (yoke) of the switch, interrupting the button's infrared sensing beam; Protected against transient voltages, reverse polarity and against false pulse on power-up, models with solid-state outputs have overload and short-circuit protection"
Continuous internal self-checking operation
Diverse-redundant microcontroller-based photoelectric touch buttons
Ergonomically designed to eliminate hand, wrist and arm stresses associated with repeated switch operation; require no physical pressure to operate
High excess gain cuts through heavy contamination
Immune to ambient light, EMI and RFI interference
LED power, output and fault indicators
Protected against reverse polarity and transient voltages
Protected against false pulse on power-up
Electronics fully epoxy-encapsulated fiber reinforced polyester base
Power On-power applied/output/fault On-button is activated, Off-button is deactivated, flashing-internal fault or blocked button on power-up detected
Up to 100000 lux ambient light immunity
150 mA maximum load output rating
125 VDC/150 VAC maximum switching voltage/1 A at 24 VDC, 0.4 A at 125 VAC (resistive loads) maximum switching voltage current/24 W DC/50 VA AC maximum resistive power
PVC jacketed 5-wire 2 m integral cable