Banner Engineering STBVP6-RB1E02 Duo-Touch® STB Self-Checking Optical Touch Button, 10 to 30 VDC, 20 ms Response Time
Optical Touch Buttons/Data Couplers
380398
MFG #: STBVP6-RB1E02
BANNER®
724.49000
/ ea
- Catalog Number: STBVP6-RB1E02
- Color: Black
- Connection Type: Terminal Strip
- Enclosure Type: IP20
- Environmental Conditions: 90% at 55 deg C Non-Condensing Maximum Relative Humidity
- Gross Weight Per Pack: 1 lb
- Indicator LEDs: (2) Green
- Operating Action: Momentary
- Operating Temperature: 0 to 50 °C
- Output Type: Solid State Complementary PNP
- Series: STB
- Size: 18.66 in L x 5.4 in W x 5.73 in H
- Standards: UL Listed
- Type: Self-Checking
- UPC 11: 66248877806
- UPC 12: 66248877806
- Stock Status: NORMALLY STOCKED
- Brand: BANNER®
- Manufacturer: Banner Engineering Corp.
- Connection Size: 7/8-16 UN
- Material: Polyetherimide
- Response Time: 20 ms
- Voltage Rating: 10 to 30 VDC
- Compliance Cert URL - Banner_Engineering_STBVP6Q_Compliance_Certificate.pdf(Compliance Cert URL)
- Full Eng Drawing URL - Banner_Engineering_STBVP6_RB1Q8_Full_Engineering_Drawing.pdf(Full Eng Drawing URL)
- Spec Sheet URL - Banner_Engineering_STBVP6_RB1E02_Specification_Sheet.pdf(Spec Sheet URL)
- Tech Drawing URL - Banner_Engineering_STBVP6_RB1E02_Technical_Drawing.pdf(Tech Drawing URL)
- Features
| Ergonomic design for reduced hand, wrist and arm stresses associated with repeated switch operation; requires no physical pressure to operate |
| Designed to minimize the possibility of defeat and accidental actuation |
| Two diverse-redundant microcontroller-based photoelectric STB self checking touch buttons |
| Continuous internal self-checking operation, Immunity to ambient light, EMI and RFI interference |
| High excess gain to cut through heavy contamination, LED power, output and fault indicators |
| Designed to be interfaced with Duo-touch SG two-hand control modules or other control systems that comply, at minimum, with ANSI NFPA 79 or IEC 60204-1 two-hand control requirements |
| Immune to ambient EMI and RFI interference |
| Protected against reverse polarity and transient voltages |
| Protected against false pulse on power-up, overload and short-circuit protection |
| Electronics fully epoxy-encapsulated fiber reinforced polyester base |
| Polyamide red button with metal base E-stop button |
| Robust 13 ga (0.090 in) cold rolled steel with powder coat paint run bar housing |
| Polypropylene copolymer STB mount |
| Power On-power applied/output/fault On-button is activated/Output/fault Off-button is deactivated/output/fault flashing-internal fault or blocked button on power-up detected |
| 1.8 W at 24 VDC (with no output load) for each STB approximate power consumption |
| Up to 100000 lux ambient light immunity |
| 150 mA maximum load output rating |
| <=1.5 VAC at full load on-state saturation voltage /less than 10 uA off-state leakage current |