Banner Engineering Q45BW22LVQ Q45BW22 Photoelectric Sensor, Rectangle Shape, 0.08 to 9 m Sensing, Visible Red Sensing Beam

Photoelectric Retroreflective Sensors
134269 MFG #: Q45BW22LVQ
BANNER®
168.29000 / ea
Banner_Q45VR2LVQ
  • Amperage Rating: 20 mA
  • Catalog Number: Q45BW22LVQ
  • Connection Type: Quick-Disconnect
  • Country of Origin: USA
  • Enclosure Type: NEMA 6P/IP67
  • Environmental Conditions: 90% at 50 deg C
  • Frequency Rating: 50/60 Hz
  • Gross Weight Per Pack: 1 lb
  • Light Source: LED
  • Operating Temperature: -40 to 70 °C
  • Sensing Method: Retro Reflective
  • Series: Q45BW22
  • Size: 44.5 mm L x 54.1 mm W x 101.6 mm H
  • Standards: CE Marked, cCSAus Certified, cULus Listed , RoHS Complaint
  • UNSPSC: 39121528
  • UPC 11: 66248837014
  • UPC 12: 66248837014
  • Voltage Rating: 90/250 VAC
  • Stock Status: NONSTOCK
  • Brand: BANNER®
  • Manufacturer: Banner Engineering Corp.
  • Output Type: Relay
  • Response Time: 2 ms
  • Sensing Beam: Red Laser
  • Sensing Range: 0.08 to 9 m
  • Shape: Rectangular
QTY
Add to Wishlist
  • Features
Advanced one-piece photoelectric sensors with outstanding optical performance and extremely rugged design; Protected solid-state relay output, 300 MILAMP maximum load at up to 250 VAC; Versatile plug-in modules available for output timing logic and/or signal strength display; Highly visible power, signal (AID system), and output indicator LEDs; Versatile mounting options; Designed to withstand 1200 PSI washdown; Polarizes the emitted light and filters out unwanted reflections, making sensing possible in applications otherwise considered unsuited toretroreflective sensing; Potentiometer located on top of sensor, beneath a transparent O-ring sealed cover
Versatile mounting options
Advanced one-piece photoelectric sensors with outstanding optical performance and extremely rugged design
Highly visible power, signal (AID system) and output indicator LEDs
Ideal for use when the reflectivity and profile of the object to be sensed are sufficient to return a large percentage of emitted light back to the sensor
Protected against transient voltages
Designed to withstand 1200 psi washdown
Manually-resettable output latch-out trips in the event of an output overload or short circuit condition
30 mm barrel diameter
Non-polarized retroreflective mode photoelectric sensor
Less than 100 uA off-state leakage, peak current 500 mA at 120 VAC, 750 mA at 250 VAC
2 ms on/off response time
680 nm visible red LED sensing beam
Acrylic lens, 90 percent at 50 deg C (non-condensing) relative humidity
3-pin mini-style quick disconnect connection
Reinforced thermoplastic polyester enclosure
Light/dark operate, SPST solid-state relay output, 300 mA maximum to 50 deg C, 3A maximum for 100 ms, 5A maximum for 1 ms inrush current, less than 3V at 200 mA saturation voltage