Banner Engineering SM312D Mani-Beam® SM312 Photoelectric Sensor, Rectangular Shape, 380 mm Sensing, Infrared Sensing Beam
Photoelectric Proximity Sensors
13436
MFG #: SM312D
BANNER®
140.71000
/ ea
- Amperage Rating: 25 mA
- Catalog Number: SM312D
- Connection Type: Cable
- Country of Origin: USA
- Enclosure Type: NEMA 1/2/3/3S/4/4X/6/12/IP67
- Environmental Conditions: 90% at 50 deg C
- Gross Weight Per Pack: 0.3550 lb
- Light Source: LED
- Operating Temperature: -20 to 70 °C
- Sensing Method: Diffuse
- Series: SM312
- Size: 53.1 mm L x 12 mm W x 33.3 mm H
- Standards: CE Marked, CSA Certified, cULus Listed , RoHS Complaint, RU Listed
- UNSPSC: 39121528
- UPC 11: 66248825619
- UPC 12: 66248825619
- Voltage Rating: 10/30 VDC
- Stock Status: NORMALLY STOCKED
- Brand: BANNER®
- Manufacturer: Banner Engineering Corp.
- Output Type: Bi-Polar
- Response Time: 1 ms
- Sensing Beam: Infrared
- Sensing Range: 380 mm
- Shape: Rectangular
- Features
| 0 |
| Compact, modulated, self-contained diffuse proximity mode sensors |
| Switch-selectable for light operate or dark operate |
| Includes Banners exclusive AID™ alignment system |
| Highly repeatable 1 msond response |
| Rugged, epoxy-encapsulated construction |
| Physically and electrically interchangeable with 18 mm barrel-type photoelectric |
| 15-turn slotted brass screw GAIN (sensitivity) adjustment potentiometer (clutched at both ends of travel), both controls are located on rear panel of sensor and protected by a gasketed, clear acrylic cover adjustments |
| Exclusive, patented alignment indicating device system (AID, US patent no 4356393) lights a rear-panel mounted red LED indicator whenever the sensor sees a light condition, with a superimposed pulse rate proportional to the light signal strength (the stronger the signal, the faster the pulse rate) |
| Industry standard mounting holes |
| Both sourcing and sinking outputs (150 mA max. each), continuous overload and short-circuit protected |
| Stainless steel screws, 18 mm barrel diameter |
| Protected against false pulse on power-up and continuous overload or short-circuit of outputs |
| Self-contained diffuse mode photoelectric sensor |
| Less than 1 uA off-state output leakage, less than 25 mA |
| Sensors will respond to either a light or dark signal of 1 ms or longer duration, 500 Hz maximum |
| 880 nm Infrared LED sensing beam |
| Acrylic lens, 90 percent at 50 deg C (non-condensing) relative humidity |
| 2 m cable connection |
| Reinforced thermoplastic polyester enclosure |
| Light/dark operate, bipolar (NPN and PNP) output, 150mA maximum each output at 25 deg C, derated to 100 mA at 70 deg C, (PNP output) less than 1 V at 10 mA and less than 2 volts at 150mA, (NPN output) less than 200 mV at 10mA and less than 1 V at 150 mA output saturation voltage |