Siemens 6EP13363BA00 6EP Fixed Power Supply, 85 to 132/170 to 264 VAC Input, 24 VDC Output, 480 W, 20 A, DIN Rail Mount

DC Power Supplies
62046 MFG #: 6EP13363BA00
Siemens
690.00000 / ea
10991_OY9TDC2A75IJNS3K
  • Alternate Catalog Number: 6EP1336-3BA00
  • ARRA Compliant: C
  • Buy American Compliant: C
  • Catalog Number: 6EP13363BA00
  • Country of Origin: RO
  • Currency: USD
  • Depth: 125 mm
  • EU RoHS Indicator: C
  • Frequency Rating: 50/60 Hz
  • Gross Volume Per Pack: 260.10
  • Gross Volume UOM: in
  • Gross Weight Per Pack: 4.8500 lb
  • Gross Weight per Pack Metric: 2.20
  • Gross Weight UOM Metric: kg
  • Harmonization Tariff Schedule Code: 8504409540
  • Height: 5.7100 in
  • Height [Metric]: 14.5034 cm
  • Length: 7.7600 in
  • Length [Metric]: 19.7104 cm
  • Replaced Catalog Number: 6EP13363BA10
  • Returnable: Y
  • Series: 6EP
  • Standards: cULus E197259cCSAus Certified
  • Type: Fixed
  • UNSPSC: 39121026
  • UPC 11: 66264310601
  • UPC 12: 662643106015
  • Width: 5.8700 in
  • Width [Metric]: 14.9098 cm
  • Stock Status: NONSTOCK
  • Brand: Siemens
  • Manufacturer: Siemens
  • Amperage Rating: 20 A
  • Input Voltage: 85 to 132/170 to 264 VAC
  • Mounting Type: DIN Rail
  • Output Voltage: 24 VDC
  • Power Rating: 480 W
QTY
Add to Wishlist
  • Features
Features: Voltage range set by means of wire jumper on the device; starting from Vin greater than 93/183 V, Switch-on current limiting, 60 AMP at 25 ° C, maximum, Built-in incoming fuse, Protection in the mains power input (IEC 898) recommended miniature circuit breaker at 1-phase operation: 10 AMP, characteristic C; required at 2-phase operation: circuit breaker 2-pole connected or circuit breaker 3RV2411-1JA10 (120 V) or 3RV2411-1FA10 (230 V), 3 PCT total tolerance, static +/-, 0.1 PCT static mains compensation, approximately, 0.1 PCT static load balancing, approximately, Output voltage setting via potentiometer, 0.1 S startup delay, maximum, 50 MS voltage rise, typical, Current range 0 - 20 AMP, 2 parallel switchable units for enhanced performance, 2 MS load step setting time 50 - 100 PCT, 100 - 50 PCT, typical, 5 MS setting time, maximum, Output overvoltage protection: less than 35 V, 23 AMP current limitation, Characteristic feature of the output or short-circuit protected, Short-circuit protection: alternatively, constant current characteristic approximately 23 AMP or latching shutdown, 23 AMP enduring short circuit current, effective level, LED yellow for overload", LED red for "latching shutdown", Primary/secondary isolation, 3.5 MILAMP maximum, 0.4 MILAMP typical, stray current, EN 55022 Class B emitted interference, EN 61000-3-2 supply harmonics limitation, EN 61000-6-2 noise immunity, Housing for side-by-side mounting, Electrical accessories: buffer module, signaling module; Operating Temperature: 0 - 70 ° C; Weight: 2.2 KG; Power Loss: 59 WTT, at Vout rated, Iout rated, approximately; Overvoltage Resistance: 2.3 ? Vin rated, 1.3 MS; Input Voltage: 120/230 VAC, 85 - 132 VAC/176 - 264 VAC; Connection: Screw-Type Terminals, Supply Input : L, N, PE: 1 screw terminal each for 0.2 - 4 SQ-MM single-core/finely stranded, Output : L+, M: 2 screw terminals each for 0.5 - 4 SQ-MM; Installation Width: 160 MM; Display: Green LED for 24 V OK; Output Voltage: 24 VDC, Controlled, Isolated, 24 - 28.8 VDC Adjustable Range, 100 MV (Residual Ripple Peak-Peak, Maximum), 30 MV (Residual Ripple Peak-Peak, Typical); Installation: Snaps onto DIN rail EN 60715 35x7.5/15"
Single phase
Screw terminals
0 to 70 deg C operating temperature
-40 to 85 deg C storage temperature
IP20 degree of protection
Class I protection
Short-circuit protection
89 % efficiency