Appleton® Intraground® N1 N1D75UM1 Dead End Pushbutton Switch Control Station, 600 VAC, 10 A, 1NO/1NC, 1 Operator
Explosion Proof Control Stations
378010
MFG #: N1D75UM1
Appleton™
895.32000
/ ea
- Actuator: Mushroom Head
- ARRA Compliant: N
- Buy American Compliant: N
- Catalog Number: N1D75UM1
- Connection Type: Threaded
- Contact Mode: Maintained
- Country of Origin: MX
- Currency: USD
- Dimensions: 6.19 in H x 4.5 in W x 5.94 in D
- EU RoHS Indicator: N
- Gross Weight Per Pack: 3.6300 lb
- Gross Weight per Pack Metric: 1.65
- Gross Weight UOM Metric: kg
- Height: 6.00 in
- Height [Metric]: 15.2400 cm
- Legend: EMERGENCY STOP
- Length: 7.00 in
- Length [Metric]: 17.7800 cm
- Material: Polyetherimide
- Operator Type: Button
- Series: N1
- Standards: UL 508/698/1203, E10449, E81751Class I, Div 2, Groups B, C, DClass II, Div 1 and 2, Groups E, F, GClass III
- Type: Dead End
- UNSPSC: 39121565
- UPC 11: 78138170099
- UPC 12: 781381700993
- Width: 7.00 in
- Width [Metric]: 17.7800 cm
- Stock Status: NONSTOCK
- Brand: Appleton™
- Manufacturer: Appleton
- Amperage Rating: 10 A
- Contact Configuration: 1NO-1NC
- NEMA Rating: NEMA 3/3R/4/4X/IP66
- Number of Operators: 1
- Voltage Rating: 600 VAC
- http://www.appletonelec.com(Seller Home Page URL)
- https://www.appleton.emerson.com/(Seller Home Page URL)
- Seller Home Page URL - appleton(Seller Home Page URL)
- Spec Sheet 1 URL - ID-SPE-v1-n1-n2-intraground-cs-appleton.pdf(Spec Sheet 1 URL)
- Spec Sheet URL - n1-n2-intraground-cs-appleton.pdf(Spec Sheet URL)
- Features
| Dozens of possible combinations of push buttons, pilot lights and selector switches |
| Smooth, rounded integral bushing in each conduit opening protects conduct or insulation |
| Accurately tapped, tapered conduit openings for tight, rigid joints and ground continuity |
| Stainless steel push button shaft operates within stainless steel bushing, assuring long, maintenance-free operation |
| Push button and selector switch contacts are silver cadmium oxide which are "sealed" in lower phenolic chamber isolated from corrosive elements |
| Assures positive contact and long, trouble-free operation |
| Enclosed stainless steel helper spring prevents accidental operation of push button in severe vibration installations |
| 1 gang |
| 1 circuit |
| Corrosion resistant stainless steel Teflon® coated hex head cap screws hold covers to body |
| Push buttons are supplied with lockout type guards as standard |
| Hole in guard will accept locks with up to 1/4" hasp |
| Permits locking of push button to prevent unauthorized operation |
| Clearly marked terminals with brass screws assure quick, easy wiring |
| Glass Reinforced Thermoplastic Polyetherimide |
| 1 element |
| Factory sealed |
| Thermoplastic polyetherimide |
| Universal, 1/2 or 3/4 in hub |
| Explosionproof, dust-ignitionproof, hazardous location |