Appleton® WSX150 ETP Weatherproof Outlet Box, Die Cast Zinc, 18.3 cu-in, 1 Gang, 5 Outlets
Weatherproof Device/Outlet Boxes
569947
MFG #: WSX150
Appleton™
21.93000
/ ea
- ARRA Compliant: N
- Buy American Compliant: N
- Catalog Number: WSX150
- Color: Gray
- Country of Origin: IN
- Cubic Capacity: 18.3 CU-IN in³
- Currency: USD
- EU RoHS Indicator: C
- Finish: Polyester Powder Coated
- Gross Weight Per Pack: 0.6900 lb
- Gross Weight per Pack Metric: 0.31
- Gross Weight UOM Metric: kg
- Height: 0.44 in
- Height [Metric]: 11.3030 mm
- Hub Size: 1/2 in
- Knockouts: 5
- Length: 15.50 in
- Length [Metric]: 39.3700 cm
- Size: 4.56 X 2.81 IN in
- Standard: UL Standard 514A; UL Listed E2527; Nema FB-1, OS-1; CSA Standard C22.2 No. 18.1, cUL Listed E2527
- Standards: CSA C22.2 No. 18.1/250.0cUL File No. E2527NEMA FB-1/OS-1UL Standard 514AUL 514DUL 1598UL Listed E2527/E53330RoHS Compliant
- Sub Brand: ETP
- Type: One Gang Weatherproof Outlet Boxes
- UNSPSC: 39121305
- UPC 11: 68785503063
- UPC 12: 687855030637
- Width: 5.80 in
- Width [Metric]: 14.7320 cm
- Stock Status: NONSTOCK
- Brand: Appleton™
- Manufacturer: Appleton
- Capacity: 18.3 in³
- Dimensions: 4.56 in H x 2.81 in W x 2 in D
- Material: Die Cast Aluminum
- Number of Gangs: 1
- Number of Outlets: 5
- Features
| 1 Gang, Hub Size 1/2 IN, 2 IN deep, With Closure Plugs, Ground Screw And Mounting Lugs |
| Rugged continuous and seamless die cast construction prevents entry of dirt, dust and moisture |
| Polyester powder coating is applied for uniform cosmetic coating and weatherproof durability |
| Mounting can be achieved with mounting lugs (provided) or by using the integral mounting knockouts |
| Smooth, accurately tapped hubs prevent wire abrasion |
| Clear UL marking and volumetric marking cast into each box and extension ring facilitate electrical inspection |
| Continuous box and cover compression ensure complete sealing at gasket interface to prevent moisture entry |
| Lockable covers and covers with integral devices are offered |
| Mounting hardware and gasket provided with each cover |
| Locking swivel knuckle on lamp holders permits positive lamp positioning and accurate directional aiming |
| Lamp holders are supplied with all hardware including locknuts, porcelain sockets and internal gaskets for reliability and weather protection |
| Photocells and lamp holders are supplied with long leads (4 in from the end of the knuckle) to facilitate wiring |
| Lighting fixtures are factory assembled and fully gasketed to ensure fast and easy installation |
| Complete installation instructions are provided with each item |
| In use covers include patented inserts and comply with NEC requirements |