Appleton® EYS1 Unilet® EYS Explosionproof Conduit Sealing Fitting, 1/2 in, For Use With IMC/Threaded Rigid Metal Conduit
Explosion Proof Conduit Sealing Fittings
85069
MFG #: EYS1
Appleton™
20.74000
/ ea
- Application: For Use With Threaded Rigid Metal Conduit And IMC
- ARRA Compliant: Y
- Buy American Compliant: N
- Catalog Number: EYS1
- Color: Gray
- Connection: Tapered FNPT
- Country of Origin: MX
- Currency: USD
- Dimensions: 3.28 in L x 1.25 in W
- EU RoHS Indicator: N
- Gross Weight Per Pack: 0.9400 lb
- Gross Weight per Pack Metric: 0.43
- Gross Weight UOM Metric: kg
- Height: 0.72 in
- Height [Metric]: 18.2880 mm
- Length: 7.50 in
- Length [Metric]: 19.0500 cm
- Series: EYS
- Standard: UL 886 (1203), UL File Number E10444, CSA C22.2 No. 30, CSA 065181, UL Listed For Class I, Groups A, B, C, D; Class II, Groups E, F, G; And Class III
- Standards: ARRA CompliantUL 886UL 1203 UL File No. E10444CSA C22.2 No. 30CSA 065181, Class I Groups A/B/C/D, Class II, Groups E/F/G Class III
- Sub Brand: UNILETS
- Type: Dust-Ignitionproof Explosionproof Raintight
- UNSPSC: 39121311
- UPC 11: 78138170468
- UPC 12: 781381704687
- Width: 4.60 in
- Width [Metric]: 11.6840 cm
- Stock Status: NONSTOCK
- Brand: Appleton™
- Manufacturer: Appleton
- Finish: Zinc Electroplate/Chromate/Epoxy Powder Coat
- Material: Grayloy-Iron
- Size: 1/2 in
- Suitable For Use With: IMC/Threaded Rigid Metallic Conduit
- Applications
- Features
| For Use With Threaded Rigid Metal Conduit and IMC |
| For preventing passage of gases, vapors or flames from one portion of conduit system to another; Required in Class I, Division 1 and 2 locations within 18 IN of enclosures containing apparatus that may cause arcs, sparks or high temperatures; Required in Class I, Division 1 and 2 locations where 2 IN or larger conduit enters enclosure, fitting housing terminals, splices or taps; Required in Class I, Division 1 and 2 locations at the boundary where conduit leaves classified location; Required in Class I, Division 1 and 2 locations where two or more enclosures are connected by 36 IN or less conduit, seal must be located within 18 IN of either enclosure; Required where cables (which exceed rate of gas or vapor transmission permitted for seals) are used in Class I, Division 2 locations; Explosionproof, dust-ignitionproof, raintight; Smooth, rounded integral bushing in each hub protects conductor insulation; Accurately tapped, tapered threads for tight, rigid joints and ground continuity; F |
| Smooth, rounded integral bushing in each hub protects conductor insulation |
| Accurately tapped, tapered threads for tight, rigid joints and ground continuity |
| Dust-ignition proof, raintight |
| Removable nipple in male sealing fitting may be used interchangeably in top or bottom hub |
| Close radius type for sealing vertical conduit runs |
| Restrict any explosion to the sealed off enclosure |
| Required in class I, Division 1 and 2 locations within 18 in of enclosures containing apparatus that may cause arcs, sparks or high temperatures |
| Required in class I, Division 1 and 2 locations where 2 in or larger conduit enters enclosure, fitting housing terminals, splices or taps |
| Required in class I, Division 1 and 2 locations at the boundary where conduit leaves classified location |
| Required in class I, Division 1 and 2 locations where two or more enclosures are connected by 36 in or less conduit, seal must be located within 18 in of either enclosure |
| Required where cables (which exceed rate of gas or vapor transmission permitted for seals) are used in class I, Division 2locations |
| 1.63 in turning radius |
| Tapered FNPT connection |
| 25% fill vertical sealing fittings for close turning radius |
| Triple-coat (Zinc electroplate, chromate and epoxy powder coat) finish |