Siemens 6EP13321SH31 SITOP S7-200 Power Supply Unit, 120/230 VAC Input, 24 VDC Output, 0.95 to 1.65 A Input, 3.5 A Output, 3.5 A
PLC Power Supply Modules
106258
MFG #: 6EP13321SH31
Siemens
365.00000
/ ea
- Amperage Rating: 1.65/0.95 A Input, 3.5 A Output
- ARRA Compliant: C
- Buy American Compliant: C
- Catalog Number: 6EP13321SH31
- Country of Origin: AT
- Currency: USD
- Depth: 62
- Dimensions: 80 mm H x 160 mm W x 62 mm D
- EU RoHS Indicator: C
- Frequency Rating: 50/60
- Gross Weight Per Pack: 1.1000 lb
- Gross Weight per Pack Metric: 0.47
- Gross Weight UOM Metric: kg
- Harmonization Tariff Schedule Code: 8504409520
- Height: 2.87 in
- Height [Metric]: 7.2898 cm
- Length: 8.46 in
- Length [Metric]: 21.4884 cm
- Mounting Type: DIN Rail
- Power Dissipation: 16 W
- Power Rating: 84
- Returnable: N
- Series: SITOP S7-200
- Specifications: 1 ph, 50/60 Hz
- Standards: UL 508, cULus-Listed, CSA C22.2 No. 142 Certified, RoHS Compliant
- Temperature Rating: 0 to 60 °C
- Type: Stabilized
- UNSPSC: 39121026
- UPC 11: 75455438703
- UPC 12: 754554387031
- Width: 4.84 in
- Width [Metric]: 12.2936 cm
- Stock Status: NONSTOCK
- Brand: Siemens
- Manufacturer: Siemens
- Input Current: 0.95 to 1.65 A
- Input Voltage: 120/230 VAC
- Output Current: 3.5 A
- Output Voltage: 24 VDC
- Features
| Features: Voltage range set via wire jumper, Switch-on current limiting, 33 AMP at 25 ° C, maximum, Duration of current limiting 3 MS at 25 ° C, T 2.5 A/250 V (not accessible), built-in incoming fuse, Protection in the mains power input (IEC 898), recommended: 2-pole miniature circuit breaker from 10 AMP, characteristic C, or from 6 AMP, characteristic D, 5 PCT total tolerance, static +/-, 0.1 PCT static mains compensation, approximately, 0.2 PCT static load balancing, approximately, 1 S startup delay, maximum, 80 MS voltage rise, typical, Current range, 0 - 3.5 AMP, 5 parallel switchable units for enhanced performance, 5 MS setting time, maximum, Output overvoltage protection according to EN 60950, 3.8 AMP current limitation, Characteristic feature of the output or short-circuit protected, Short-circuit protection: constant current characteristic up to typical 14 V, electronic shutdown below that, automatic restart, 4 AMP, enduring short circuit current, effective level, Primary/secondary isolation, EN 55022 Class B emitted interference, EN 61000-3-2 supply harmonics limitation, EN 61000-6-2 noise immunity, Housing for side-by-side mounting; Connection: Screw-Type Terminals, Supply Input : L, N, PE: 1 screw terminal each for 0.5 - 1.5 SQ-MM single-core/finely stranded, Output : L+: 1 screw terminal for 0.5 - 1 SQ-MM; M: 2 screw terminals for 0.5 - 1 SQ-MM; Installation Width: 160 MM; Output Voltage: 24 VDC, Controlled, Isolated, 150 MV (Residual Ripple Peak-Peak, Maximum), 30 MV (Residual Ripple Peak-Peak, Typical); Overvoltage Resistance: 2.3 ? Vin rated, 1.3 MS; Power Loss: 16 WTT, at Vout rated, Iout rated, approximately; Display: Green LED for 24 V OK; Weight: 0.5 KG; Input Voltage: 120/230 VAC, 93 - 132 VAC/187 - 264 VAC; Operating Temperature: 0 - 60 ° C; Installation: Snaps onto DIN rail EN 60715 35x7.5/15, wall mounting |
| Screw terminal |
| Snaps on to DIN rail EN 60715 35 x 7.5/15, wall mounting |