| Selective load protection, electronic trip characteristics |
| Active current limitation for safe connection of capacitive loads up-to 20000 micro-F and on overload/short circuit |
| Reliable overload disconnection with 1.1 x in plus, even with long load lines or small cable cross sections |
| Manual ON/OFF button (S1) |
| Control input IN+ for remote ON/OFF signal (option) |
| Electronic reset input RE (option) |
| Clear status and failure indication through LED, status output SF or Si contact F |
| Integral fail-safe element adjusted to current rating |
| Width per unit only 12.5 mm |
| Ease of wiring through busbar LINE+ and 0 V as well as signal bars and bridges |
| Hazardous area approved - class 1 division 2, zone 2, ATEX zone 2 |
| -20 to 70 deg C storage temperature |
| Typically 20 to 30 mA closed current in on condition, depending on signal output |
| Power-MOSFET switching load output (high side switch) |
| Typically 3 sec trip time for electronic disconnection |
| Internal temperature monitoring with electronic disconnection |
| Typically 0.5 sec starting delay after every switch-on and after applying Ub |
| Electronic disconnection of load output |
| External free-wheeling diode recommended with inductive load |
| 32 vdc maximum dielectric strength |
