Valenite Tiger-tec® Silver 6955672 Positive Single Sided Turning Insert, VCGT331-FN2 WNN10 ANSI, Rhombic, VCGT Insert
VCGT Turning Inserts
PDW~12584989
MFG #: VCGT331-FN2WNN10
Walter (Valentine)
27.20000
/ ea
VALENITE Tiger-tec® Silver Turning Insert, Positive Single Sided, VCGT Insert, Rhombic, 2.5 mm Maximum Depth of Cut, 9.525 mm Inscribed Circle, 4.76 mm Thickness, FN2 Chipbreaker, 0.4 mm Corner Radius, Manufacturer's Grade: WNN10, ANSI Code: VCGT331-FN2 WNN10, ISO Code: VCGT160404-FN2 WNN10, 35 deg Included Angle, 7 deg Relief Angle, Neutral Hand, Carbide, Coated
- Features
Longer tool life - excellent wear and fracture resistance |
Prevents layer peeling - strong intra coating adhesion |
Higher adhesion between each layer with improved crystal structure |
Control chipping - higher layer strength |
XP chipbreaker - wide chip control range and sharp cutting performance |
Suitable for low carbon steel and sticky material |
CA515 grade special substrate and tough coating film provides thermal deformation and high wear resistance |
Continuous to light interrupted steel machining (general use) |
+/-0.025 mm corner point tolerance |
+/-0.13 mm thickness tolerance |
+/-0.025 mm inscribed circle tolerance |
0.08 to 0.25 mm feed/rev |
16.6 mm cutting edge length |
5 deg rake |