TPI P3P2610CA1 2600 3-Phase Downflow Standard Electric Unit Heater, 34130 Btu, 480 VAC, 12.04 A, 10 kW
Electric Unit Heaters
905998
MFG #: P3P2610CA1
TPI
2303.90000
/ ea
TPI Electric Unit Heater, 3-Phase Downflow Standard, Series: 2600, 34130 Btu, 480 VAC, 12.04 A, 10 kW, 1200 cfm, 1570 rpm, Panel Mount, 6 ft Mounting Height, Steel, Gray, 15 in H x 20-1/2 in W x 20-1/2 in D
- Applications
- Features
Indoor-Commercial/Industrial-Downflow/High Bay Areas |
Features: Corrosion-Resistant;Overheat Protection;Manual Reset Limit Control;Fan Purge Circuit;Manufactured in U.S.A.; Btu Rating: 34130; Amperage Rating: 124 AMP; Finish: Epoxy Powder Coated; Air Flow: 1200 CFM; Series: 2600; Control Voltage: 24 V |
16 ga steel cabinet with epoxy powder coated finish and control compartment with a hinged and latched access door |
Corrosion resistant element with steel sheath and steel spiral fins |
All units come equipped with manual reset limit controls to de-energize the heater should an over temperature situation occur |
Totally enclosed, 1-Speed, 1-phase permanently lubricated, thermally protected motors with unit bearings on 3 to 20 kW models |
1570 rpm max axial flow fan blade |
All models equipped with fan purge which allows fan to operate after elements are de-energized to purge residual heat |
Equipped with in-built disconnect switch |
Unit can be mounted using optional mounting bracket or field constructed angle iron bracket |
Not recommended for mounting with threaded rod or chain |
Elements shall consist of nickel-chromium alloy resistance wire embedded and completely surrounded in magnesium oxide, enclosed and swaged into corrosion resistant sheath |
Heaters shall be designed for a single supply circuit with elements, motor and control circuits subdivided and fused to conform with the latest National electric Code and OSHA requirements |
All 3-phase heaters shall have balanced phases |
Overheat protection |
24 V control voltage |
Overheat protection |