Sandvik Coromant 6707333 T-Max® P Negative Basic Shape Turning Insert, CNMG 432-PM 4305, C-80 deg Diamond, CNMG Insert
CNMG Turning Inserts
897568
MFG #: 6707333
Sandvik Coromant
17.17000
/ ea
Sandvik Coromant Turning Insert, Negative Basic Shape, Series: T-Max® P, CNMG Insert, C-80 deg Diamond, 5.5 mm Maximum Depth of Cut, 1/2 in Inscribed Circle, 0.1874 in Thickness, 0.5077 in Length, PM Chipbreaker, 0.0312 in Corner Radius, 0.2029 in Hole Dia, Manufacturer's Grade: 4305, ANSI Code: CNMG 432-PM 4305, ISO Code: CNMG 12 04 08-PM 4305, 80 deg Included Angle, 0 deg Relief Angle, Neutral Hand, Carbide, MTCVD Coated, Material Grade: K/P
- Features
| T5305 grade fine grained substrate with a low cobalt content |
| Thick layer of MT-CVD coating with a layer of Al2O3 on the surface |
| Special finish for coating |
| Top performance for machining gray cast iron |
| Material with the highest abrasion resistance of the 5300 series |
| Higher cutting speeds |
| Continuous and slightly interrupted cut |
| 20 life cycle state |