SGS® 32606 V-Carb™ 55CR Corner Radius Medium Length Single End High Performance End Mill, 1/8 in, 1/4 in Max Depth of Cut, 5 Flutes, 1/8 in Shank, 1-1/2 in OAL
Corner Radius & Corner Chamfer End Mills
535159
MFG #: 32606
SGS
19.91000
/ ea
The V-Carb end mill is the finishing touch that you can expect more from. The geometry produces superior surface finishes in ferrous materials with a high level of accuracy needed for semi-finishing and finishing of components. However, the chatter suppressing design allows you to push the tool well beyond the limits of light finishing cuts. Tackle a range of applications with this tool.
- Features
| High performance finishing and semi-finishing 5 flute variable geometry end mill; 45 DEG right spiral helix angle; Positive rack angle; External coolant recommanded; Variable pitch combined with an odd number of flutes suppresses chatter and produces better surface finishes; Rigid construction minimizes deflection and increases part accuracy; Optimized tool geometry allows for improved shearing and decreased loads |
| Variable pitch combined with an odd number of flutes suppresses chatter and produces better surface finishes |
| Rigid construction minimizes deflection and increases part accuracy |
| Optimized tool geometry allows for improved shearing and decreased loads |
| Can be run at higher production rates |
| Tool holders with adequate gripping pressure are required |
| Stub length solid holders are recommended for heavy stock removal |
| Avoid remilling chips |
| Set-up rigidity critical during heavy roughing |
| Regrind and recondition services are available from SGS tool company |
| External coolant |
| Positive rake angle |
| Unequal flute spacing |
| Solid carbide provides better rigidity than high speed steel |
| It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials |
| Applicable materials: steels, stainless steels, cast iron, high temp alloys and titanium |