| Waterproof construction provides environmental separation at the front of each device (they don't have to be connected together just to be called "watertight"). |
| Without adapter and box |
| Waterproof construction provides environmental separation at the front of each device (they dont have to be connected together just to be called "watertight") |
| Center ground contact |
| 24-single rated factory polarizations |
| Gated deadfront construction |
| Two optional control contacts |
| O-rings/environmental separation, full line |
| Complete line epoxy powder coated - standard |
| All devices upon disconnect under load shall have provision so the arc is contained and extinguished within the insulation cavity, making it impossible to withdraw a live plug |
| All devices shall be factory polarized for amperage, voltage, frequency and phase, thus providing a single voltage rating, single interface system |
| The grounding of the device shall be accomplished through a separate center ground (earth) make first and break last pole on all devices for complete system grounding |
| All devices shall accommodate up to four power pins plus a separate center ground pin and they shall be integral with the connector bodies (five pins total) |
| Watertight capability shall be obtained by using a gasketed screw cap |
