• Features
This low activating force switch is basically a pushbutton device operated through a nickel plated operating lever attached to the cover; Care must be taken when choosing and installing the operating rope because the low operating force can be easily overcome and the switch will not trip or reset properly; This switch requires a suitable enclosure which must be purchased separately; A sealing gasket and four mounting screws are supplied with each switch; Each captive terminal will accept (2) 14 AWG stranded wires; Low operating force; Gold plated contacts eliminate high resistance tarnishing; The maximum recommended rope length is 33 FT with a maximum interval support of 10 FT when horizontal; Heavy duty - A600/N300 rating; Note: Operating temperatures at 0 DEG C are based on the absence of freezing moisture and liquids
This switch is a slack cable style with slow-make slow break contacts
This low activating force switch is basically a pushbutton device operated through a nickel plated operating lever attached to the cover
Care must be taken when choosing and installing the operating rope because the low operating force can be easily overcome and the switch will not trip or reset properly
This switch requires a suitable enclosure which must be purchased separately
Low operating force
Gold plated contacts eliminate high resistance tarnishing
The maximum recommended rope length is 33 ft with a maximum interval support of 10 ft when horizontal
The mechanical life of the switch is in excess of 1000000 operations
Operating temperatures at 0 deg C are based on the absence of freezing moisture and liquids
60, 30, 15, 12 A inrush current
6 lb trip force
0.07 lb operating force between 10 ft supports
A600/N300 heavy duty rating
-40 to 85 deg C storage temperature
2.5 kV impulse-withstand voltage
600 VAC insulation
6 A/1.2 A at 110 to 120/550 to 600 VAC, 2.2 A/1.1 A at 115 to 125/230 to 250 VDC