Raychem® AMC-F5 Ambient Sensing Mechanical Thermostat, SPST, Pigtail Terminal Designations
Heat Trace Thermostats
143670
MFG #: AMC-F5
nVent RAYCHEM
207.76000
/ ft
The Raychem AMC-F5 thermostat is designed to control electric heat tracing systems used for pipe freeze protection in non hazardous locations. The thermostat has a fixed set point of 40 deg F (4.4 deg C) and can be used in ambient-sensing mode (with sensor in air) or line-sensing mode (with sensor placed on pipe or tank wall). It can be used to control a single heat tracing circuit or as a pilot control of a contactor switching multiple heat tracing circuits. It can also be used to control a contactor coil. Images shown for wire are for illustrative purposes only. Color shade and packaging/spooling may vary.
- Catalog URL - Raychem_AMC_F5_Catalog.pdf(Catalog URL)
- Install Instructions URL - Raychem_AMC_1A_Installation_Sheet.pdf(Install Instructions URL)
- Spec Sheet URL - SPE_EN-DigiTraceAMCF5-IM-H56912_tcm432-26044.pdf(Spec Sheet URL)
- Seller Home Page URL - www.pentairthermal.com(Seller Home Page URL)
- Spec Sheet 1 URL - Raychem_AMC_F5_Datasheet_1.pdf(Spec Sheet 1 URL)
- Warranty URL - Raychem_AMC_1A_Warranty.pdf(Warranty URL)
- Applications
- Features
| For Controlling Freeze Protection Heat-Tracing Circuits In Ordinary Areas |
| The digitrace thermostat is designed to control electric heat tracing systems used for pipe freeze protection in non hazardous locations ; The thermostat has a fixed set point of 40 &176; Fand can be used in ambient-sensing mode (with sensor in air) or line-sensing mode (with sensor placed on pipe or tank wall) ; It can be used to control a single heat tracing circuit or as a pilot control of a contactor switching multiple heat tracing circuits ; It can also be used to control a contactor coil ; Enclosure: NEMA 4X, UV-resistant thermoplastics ; Entries: one 3/4 IN through hole ; Sensor exposure limits: - 30 &176; Fto 140 &176; F(- 34 ° C to 60 ° C) ; Housing exposure limits: - 30 &176; Fto 140 &176; F(- 34 ° C to 60 ° C) ; Switch: SPST ; Accuracy: +/- 3 &176; F(+/- 1.7 ° C) ; Deadband: 2 &176; Fto 12 &176; F(1.1 ° C to 6.7 ° C) above actuation temperature ; |
| Tin-plated copper sensor material |
| 40 deg F nonadjustable set point |
| +/- 3 deg F accuracy |
| UV-resistant thermoplastic enclosure |
| 2 to 12 deg F above actuation temperature dead band |
| - 30 to 140 deg F sensor exposure limit |
| - 30 to 140 deg F housing exposure limit |