| Aggressive Tip Geometry Provides Faster Cutting; Coated Flutes For Fast Chip Removal; Wire Pulling Hole Enables Wire To Be Attached To The Bit And Pulled Through Holes When Needed; 3-Flat Shank Stops Bit From Slipping In The Drill'S Chuck; 1/4 IN Bellhanger Bit Comes In 12 IN, 18 IN, And 24 IN Lengths |
| Extra length for extra reach |
| Pull the wire back through the hole by simply attaching a line or the wire to the bit |
| Reduced slipping - 3-flat Secure Grip™ shank holds the bit firmly in the chuck |
| Wire pulling hole enables wire to be attached to the bit and pulled through holes when needed |
| A small hole at the tip of the bit enables wire to be attached to the accessory and pulled through holes when installing wiring systems |
| Cw spiral angle |
| 2 flutes |
| Round shanks with flats are ground flat on three sides for increased chuck grip, reducing slippage and help centering the drill in the chuck |
| They are used with portable drills and drill presses on ferrous and non-ferrous materials |
| High speed steel (HSS) provides good wear resistance and can be used in general purpose applications on both ferrous and non-ferrous materials |
| Bright provides a smooth, polished finish on the tool |
| It increases chip flow in softer materials such as aluminum, wood and plastic |
