PP Series Power Packs provide both the 24 V- power supply to operate LutronR wired occupancy sensors, as well as the 16 A line voltage relay to control the load, in one compact housing. The unit can be mounted inside the ballast enclosure or inside/outside a junction box.
- http://www.lutron.com(Seller Home Page URL)
- Install Instructions 1 URL - 10977_W5QYTIA2DCPNGSVH.pdf(Install Instructions 1 URL)
- Tech Drawing URL - 10977_P16ZNYCUJDRH2SBK.pdf(Tech Drawing URL)
- Tech Drawing URL - Lutron_PP_DV_Technical_Drawing.pdf(Tech Drawing URL)
- Spec Sheet URL - 10977_0GUA7CLBRIJXMNFY.pdf(Spec Sheet URL)
- Spec Sheet URL - 369544_ENG.pdf(Spec Sheet URL)
- Warranty URL - 10977_W85ERUZCVKMJXSAD.pdf(Warranty URL)
- Video - https://www.youtube.com/embed/t8JEhqqjfa0(Video)
- Features
Supports up to 3 devices, including occupant sensors and PP-SH units |
The manual ON power pack (-DV-M) is used to provide a vacancy solution when paired with Lutron® wired occupancy sensors |
A low voltage momentary switch should be used to manually turn ON the load while the sensor automatically shuts the load OFF when unoccupied |
Pressing the momentary switch can also turn the load OFF |
High-impact UL 94, flammability-rated, plastic case construction |
Relay Class B insulating material, silver alloy contacts |
Complies with requirements for use in a compartment handling environmental air (plenum) per NEC® 2011 300.22(C)(3) |
1 HP motor load |
16 to 18 AWG wire lead |