Leviton® OSFHP-ILW High Bay Fixture Mount Occupancy Sensor, 24 VAC/VDC, Passive Infrared Sensor, 25 ft Coverage, 360 deg
Fixture Mount Occupancy Sensors
627815
MFG #: OSFHP-ILW
Leviton®
106.93000
/ ea
Leviton's fixture mount occupancy sensors are low voltage occupancy detectors that work in conjunction with various Leviton products. The motion sensors main function is to turn the lights on or maintain the lights on while movement is detected. Available in infrared.
- http://www.leviton.com(Seller Home Page URL)
- Install Instructions URL - Leviton_OSFHP_ILW_Installation_Instructions.pdf(Install Instructions URL)
- Spec Sheet 2 URL - ID-SPE-v1-OSFHP-ILW.pdf(Spec Sheet 2 URL)
- Tech Bulletin URL - Leviton_ODC0P_W_Technical_Bulletin.pdf(Tech Bulletin URL)
- Safety Data Sheet URL - MSDS.pdf(Safety Data Sheet URL)
- Spec Sheet URL - 10962_2S3XCOGJI8E9HLMB.pdf(Spec Sheet URL)
- Video - https://youtube.com/embed/zv5tNFN-q9w(Video)
- Applications
- Features
| Commercial |
| 5-Year Limited Warranty, Country of Origin China, Rotating Light Sensor, Auto Calibration, Manual Calibration, Fast and Simple Installation |
| Rotating light sensor optimal for best performance in locating light measurements (up, down and side lighting) |
| Auto-calibration set to auto calibration, light sensor measures lowest light level of facility with all lights ON for 24 hr to determine the daylighting set point |
| Manual calibration optimize energy savings and operation by manually configuring the daylighting set point |
| Performance daylighting enhanced design algorithms to assure lights will not cycle during cloud cover or varying light levels |
| Fast and simple setting the OSFHP does not require power to set the time delay saving valuable time during installation load 1 =30 sec to 30 min, load 2 =30 sec infinity (starts after load 1 expires) |
| Fast and simple testing OSFHD will "instant ON" within 5 sec, upon initial power, relay is closed enabling labor savings testing in sec |
| Power interruption state for energy savings and safety, if power is lost to device, device will return to last known state |
| Fast, simple installation the OSFHP sensor easily installs on individual fixtures using standard 1/2 in knockouts and the quicksnap feature which eliminates the time to tighten the locknut |
| The 42 in wire leads reduce time and materials for connecting the ballast |
| Simply make the electrical connections inside the ballast compartment, install the appropriate adjustable lens assembly included and the sensor is ready |
| Zero crossing circuitry relay uses a zero crossing circuitry to provide reliable, long life operation |
| Range and coverage the 360 deg high bay PIR lens provides a 21 spacing to mounting height coverage under 25 ft mounting and a 1.51 for heights up to 40 ft mounting |
| The 360 deg low bay lens provides 21 spacing to mounting height coverage for 8 to 20 ft mounting |
| LED super bright green LED indicates occupancy detection and can be seen at 40 ft |
| False detection protection energy saving technology is designed into the OSFHD to assure your lights are ON only when needed |
| Manual calibration |
| Performance daylighting |
| Fast and simple setting |
| False detection protection |