Hubbell® HBL460C9W Female Pin and Sleeve Connector, 250 VAC, 60 A, 3 Poles, 4 Wires, Blue
Pin & Sleeve Connectors
27003
MFG #: HBL460C9W
Hubbell Wiring Device-Kellems
691.91000
/ ea
Hubbell® Pin and Sleeve Connector, Female, 250 VAC, 50 A, 5 hp, 3 Pole, 4 Wires, Grade: Industrial, IP67 Enclosure, -40 to 75 deg C, Screw Terminal, 801 Nylon/Zytel, Blue
- Catalog URL - HUBBELL_HBL460C7W_Catalog.pdf(Catalog URL)
- http://www.hubbell-wiring.com/(Seller Home Page URL)
- Install Instructions 1 URL - 11456_PDY5FZ2LGIMES1BW.pdf(Install Instructions 1 URL)
- Install Instructions URL - IDW_DOCUMENT_1537661861221.pdf(Install Instructions URL)
- Line Drawing URL - 11456_N5VRH263IZMXEUK8.pdf(Line Drawing URL)
- Line Drawing URL - 11456_X6A9I301BCQOHR27.pdf(Line Drawing URL)
- Spec Sheet URL - 11456_VPST93DL2W51UMZO.pdf(Spec Sheet URL)
- Tech Drawing URL - WIRING_HBL460C9W_M13308_ACAD_DRAWING.dwg(Tech Drawing URL)
- Warranty URL - 11456_Y8PS6T0FNOGH3Q75.pdf(Warranty URL)
- Warranty URL - Wiring_WDK_Warranty.pdf(Warranty URL)
- Applications
- Features
| High Ampacity Connections |
| Watertight |
| 8 to 2 AWG copper wire size |
| 0.5 to 1.45 in cord clamp range |
| High impact thermoset contact carrier and retainer |
| 300 series stainless steel terminal screws and assembly screws |
| Solid neoprene gaskets and grommet/glands |
| Rynite SST35 cord clamps, cover arm and cover |
| Stainless steel (17-1 type) arm spring and cord clamp screws |
| Nickel plated brass clamp nut and cover screw/rivet |
| Polycarbonate rotating sealing disc, brass ground/phase sleeve |
| Beryllium copper multi-contact insert with silver plating pin/sleeve spring |
| Withstands 3000 VAC minimum dielectric voltage |
| Maximum 30 deg C temperature rise at full rated current after 50 cycles of overload at 150% rated current for either AC or DC applications per UL 498 temperature rise |
| 5000 connect and disconnect cycles with load for 16/20 A, 1000 cycles with load and 1000 cycles without load for 30/32/60/63 A and 250 cycles with load and 250 cycles without load for 100/125 A endurance |
| Round portable service cords of diameters commensurate with the device rating as defined in UL standard 62, CSA C22.2 No. 49 and the harmonized European standards |
| Terminals identified in accordance with North American and IEC conventions terminal identification |
| Identification and ratings are a permanent part of the device housing |
| Watertight per IEC 60309-1 moisture resistance |
| Cord mounted |
| Non-NEMA rating |
| HB or better per UL 94 or CSA C22.2 no. 0.17 flammability |