HPS Drive Isolation DM007JC Drive Isolation Transformer, 460 VAC Primary, 230Y VAC Secondary, 7.5 kVA, 60 Hz, 3 Phase
Drive Isolation Transformers
542176
MFG #: DM007JC
HPS (Hammond Power Solutions)
1512.57000
/ ea
HPS Drive Isolation Transformers are designed to meet the rugged demands of both AC and DC variable speed drives and also to provide the required voltage change. The separate primary and secondary windings provide electrical isolation between the incoming line and the SCR load. The windings are designed to withstand overcurrent of 150% of the rated load for 60 seconds or 200% of the rated load for 30 seconds. A duty cycle of one start for every two hours is permitted.
- Brochure URL - 11516_LP0IRMVJW59XOUA7.pdf(Brochure URL)
- Brochure URL - HPS-Tribune-Non-Efficient-Brochure.pdf(Brochure URL)
- Catalog 1 URL - HPS_DE027KD_Catalog_1.pdf(Catalog 1 URL)
- Catalog URL - IDW_DOCUMENT_7a78e1cd0bfb693ae735b09b09ee701c9ecf0a451c6dd3622abdc24f4023b347.pdf(Catalog URL)
- http://www.hammondpowersolutions.com(Seller Home Page URL)
- Install Instructions URL - HPS_DE027KD_Installation_Instructions.pdf(Install Instructions URL)
- Safety Data Sheet URL - HPS_MSDS.pdf(Safety Data Sheet URL)
- Spec Sheet URL - 11516_658J31FRXVUM2YE9.pdf(Spec Sheet URL)
- Spec Sheet URL - HPS-1%202kV-Class-Drive-Isolation-Transformer-Typical-Spec.pdf(Spec Sheet URL)
- Tech Bulletin URL - WebConfig.aspx?pn=DM007JC(Tech Bulletin URL)
- Warranty URL - warranty-and-terms(Warranty URL)
- Applications
- Features
Variable Speed Drives. |
Designed to withstand overcurrent of 150% of the rated load for 60 seconds or 200% of the rated load for 30 seconds. Comes standard in an indoor/outdoor enclosure with a coil mounted thermal warning switch. |
Designed to withstand overcurrent of 150% of the rated load for 60 seconds or 200% of the rated load for 30 seconds |
Comes standard in an indoor/outdoor enclosure with a coil mounted thermal warning switch |
The separate primary and secondary windings provide electrical isolation between the incoming line and the SCR load |
Neutral terminal for field connection (on applicable units) |
Aluminum wound |
High grade non-aging, fully processed silicon steel laminations or better coil |
ST-20 compliant taps |
ANSI 61 UL 50 gray enclosure finish |
40 deg C maximum |