Decora® OSSMD-GDI 1-Pole Dual Relay Wall Mount Occupancy Sensor, 120/230/277 VAC, 2400 sq-ft Coverage, 180 deg
Wall Mount Occupancy Sensors
482784
MFG #: OSSMD-GDI
Leviton®
161.18000
/ ea
The OSSMD provides automatic lighting control for two separate loads from a single unit. It is compatible with incandescent, fluorescent, low voltage lighting and fan loads. The unit features dual manual override switches that can be used to toggle the ON/off status of each lighting load while an area is occupied. The OSSMD can be installed in place of two single-pole wall switches and fits in a standard single gang wall box. The second relay is manual-on only and complies with California Title 20/24.
- Application GDE 1 URL - Leviton_OPB15_DW_1_Application_Guide_1.pdf(Application GDE 1 URL)
- http://www.leviton.com(Seller Home Page URL)
- Safety Data Sheet URL - MSDS.pdf(Safety Data Sheet URL)
- Install Instructions URL - Decora_OSSMD_GAE_Installation_Sheet.pdf(Install Instructions URL)
- Spec Sheet 1 URL - Decora_OSSMD_GDI_Datasheet_1.pdf(Spec Sheet 1 URL)
- Spec Sheet URL - ProductDetail.jsp?partnumber=OSSMD-GDI§ion=38557&minisite=10251(Spec Sheet URL)
- Video - https://www.youtube.com/embed/jK48BrNhHBw&rel=0(Video)
- Tech Bulletin URL - Leviton_ODS10_IQE_Technical_Bulletin.pdf(Tech Bulletin URL)
- Applications
- Features
| Commercial |
| Provides Automatic Lighting Control for Two Separate Banks of Fluorescent, Incandescent or Low-Voltage Lighting From a Single Unit, The Second Relay is a Manual-On Only with a Maximum 30 Minute Time-Out for Maximum Energy Savings, Fits in a Standard Wall |
| Neutral wire not required |
| Grounding wire required |
| External power pack not required |
| Commercial grade and internal photocell |
| Ambient light Override |
| 1200 VA at 120 VAC, 2700 VA at 277 VAC primary relay fluorescent, 800 W at 120 VAC primary relay incandescent and 800 VA at 120 VAC, 1200 VA at 277 VAC secondary relay fluorescent, 800 W at 120 VAC secondary relay incandescent, 1/4 hp motor load ratings |
| -10 to 85 deg C storage temperature range |
| 20% to 90% non-condensing relative humidity |
| For indoor use only |
| Provides automatic lighting control for two separate banks of fluorescent, incandescent, or low voltage lighting from a single unit |
| Low-profile design eliminates obtrusive "scanning-device" look |
| 180 deg field-of-view provides approximately 2400 square feet of coverage |
| Vandal resistant PIR lens |
| False detection circuitry |
| Ability to disable PIR or U/S for added flexibility |
| Motor load type |