DRAIN 3/4" ORDINARY LOC-STEEL
Explosion Proof Conduit Breather & Drains
599920
MFG #: CRN75S
Appleton™
25.76000
/ ea
Where condensation may be a problem, drain fittings are installed at the bottom of the enclosures to drain away moisture. Breather fittings are generally installed at the top of an enclosure to allow water vapor to escape and minimize condensation within the enclosure interior. Universal drain/breather fittings provide both functions in a single fitting that can be installed at the top and/or bottom of the enclosure housing. Appleton Group offers fittings for both hazardous and ordinary locations, along with conductive and non-conductive thread/joint lubricants to prevent seizing and galling of these and other threaded components.
- http://www.appletonelec.com(Seller Home Page URL)
- https://www.appleton.emerson.com/(Seller Home Page URL)
- Seller Home Page URL - appleton(Seller Home Page URL)
- Spec Sheet URL(Spec Sheet URL)
- Warranty URL - 11043_AFRVNTEYP0B9JHS4.pdf(Warranty URL)
- Warranty URL - appleton-grp-terms-and-conditions.pdf(Warranty URL)
- Features
| Non-hazardous location; To provide a means for the prevention and/or release of condensation when properly installed in the appropriate location; Explosionproof, dust-ignitionproof; Accurately tapped, tapered threads for tight, rigid joints and ground continuity; Generally installed at bottom of enclosure housing to drain moisture caused by condensation |
| Accurately tapped, tapered threads for tight, rigid joints and excellent ground continuity |
| Tapered MNPT connection |
| To provide a means for the prevention and/or release of condensation when properly installed in the appropriate location |
| For non-hazardous location |
| Generally installed at bottom of enclosure housing to drain moisture caused by condensation |
| Zinc Electroplated |
| Class I, Division 1 And 2 Groups B, C, D, Class II, Division 1 and 2 Groups E, F, G, Class III |